File manager - Edit - /home/bdwebsol/public_html/demo.bdwebsolution.com/rules.d.zip
Back
PK �Y�\��Tv v 71-nvmf-hpe.rulesnu �[��� # Set appropriate iopolicy for HPE Alletra Storage MP ACTION=="add", SUBSYSTEM=="nvme-subsystem", ATTR{subsystype}=="nvm", ATTR{model}=="HPE Alletra", ATTR{iopolicy}="round-robin" # Set ctrl_loss_tmo to -1 for HPE Alletra Storage MP NVMe/TCP ACTION!="remove", SUBSYSTEM=="nvme", KERNEL=="nvme*", ATTR{transport}=="tcp", ATTR{model}=="HPE Alletra", ATTR{ctrl_loss_tmo}="-1" PK �Y�\�$�DD D 10-dm.rulesnu ��6�$ # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules create a DM control node in /dev/mapper directory. # The rules also create nodes named dm-x (x is a number) in /dev # directory and symlinks to these nodes with names given by # the actual DM names. Some udev environment variables are set # for use in later rules: # DM_NAME - actual DM device's name # DM_UUID - UUID set for DM device (blank if not specified) # DM_SUSPENDED - suspended state of DM device (0 or 1) # DM_UDEV_RULES_VSN - DM udev rules version # # These rules cover only basic device-mapper functionality in udev. # # Various DM subsystems may contain further subsystem-specific rules # in 11-dm-<subsystem_name>.rules which should be installed together # with the DM subsystem and which extend these basic rules. # For example: # 11-dm-lvm.rules for LVM subsystem # 11-dm-mpath.rules for multipath subsystem (since version 0.6.0, recommended!) # # Even more specific rules may be required by subsystems so always # check subsystem's upstream repository for recent set of rules. # Also, keep in mind that recent rules may also require recent # subsystem-specific binaries. SUBSYSTEM!="block", GOTO="dm_end" KERNEL!="dm-[0-9]*", GOTO="dm_end" # Device created, major and minor number assigned - "add" event generated. # Table loaded - no event generated. # Device resumed (or renamed) - "change" event generated. # Device removed - "remove" event generated. # # The dm-X nodes are always created, even on "add" event, we can't suppress # that (the node is created even earlier with devtmpfs). All the symlinks # (e.g. /dev/mapper) are created in right time after a device has its table # loaded and is properly resumed. For this reason, direct use of dm-X nodes # is not recommended. ACTION=="remove", GOTO="dm_end" # Persist device state on transition from the initrd. This means all udev device # properties are kept in the udev database even when it is cleaned up on # switch-root. OPTIONS+="db_persist" # Decode udev control flags and set environment variables appropriately. # These flags are encoded in DM_COOKIE variable that was introduced in # kernel version 2.6.31. Therefore, we can use this feature with # kernels >= 2.6.31 only. Cookie is not decoded for remove event. ENV{DM_COOKIE}=="?*", IMPORT{program}="/usr/sbin/dmsetup udevflags $env{DM_COOKIE}" # There is no cookie set nor any flags encoded in events not originating # in libdevmapper so we need to detect this and try to behave correctly. # For such spurious events, regenerate all flags from current udev database content # (this information would normally be inaccessible for spurious ADD and CHANGE events). ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}="1", GOTO="dm_flags_done" IMPORT{db}="DM_UDEV_DISABLE_DM_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_DISK_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_OTHER_RULES_FLAG" IMPORT{db}="DM_UDEV_LOW_PRIORITY_FLAG" IMPORT{db}="DM_UDEV_DISABLE_LIBRARY_FALLBACK_FLAG" IMPORT{db}="DM_UDEV_PRIMARY_SOURCE_FLAG" IMPORT{db}="DM_UDEV_FLAG7" IMPORT{db}="DM_UDEV_RULES_VSN" LABEL="dm_flags_done" # If DISK_RO is set, it's an uevent that changes the ro attribute of the device. # The event should be ignored as far as dm is concerned. ENV{DISK_RO}=="0|1", GOTO="dm_disable" # Normally, we operate on "change" events. But when coldplugging, there's an # "add" event present. We have to recognize this and do our actions in this # particular situation, too. Also, we don't want the nodes to be created # prematurely on "add" events while not coldplugging. We check # DM_UDEV_PRIMARY_SOURCE_FLAG to see if the device was activated correctly # before and if not, we ignore the "add" event totally. This way we can support # udev triggers generating "add" events (e.g. "udevadm trigger --action=add" or # "echo add > /sys/block/<dm_device>/uevent"). The trigger with "add" event is # also used at boot to reevaluate udev rules for all existing devices activated # before (e.g. in initrd). If udev is used in initrd, we require the udev init # script to not remove the existing udev database so we can reuse the information # stored at the time of device activation in the initrd. ACTION!="add", GOTO="dm_no_coldplug" ENV{DM_UDEV_RULES_VSN}!="1", ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}!="1", GOTO="dm_disable" ENV{DM_ACTIVATION}="1" LABEL="dm_no_coldplug" # Putting it together, following table is used to recognize genuine and spurious events. # N.B. Spurious events are generated based on use of the WATCH udev # rule or by triggering an event manually by "udevadm trigger" call # or by "echo <event_name> > /sys/block/dm-X/uevent". # # EVENT DM_UDEV_PRIMARY_SOURCE_FLAG DM_ACTIVATION # ====================================================================== # add event (genuine) 0 0 # change event (genuine) 1 1 # add event (spurious) # |_ dev still not active 0 0 # \_ dev already active 1 1 # change event (spurious) # |_ dev still not active 0 0 # \_ dev already active 1 0 # "dm" sysfs subdirectory is available in newer versions of DM # only (kernels >= 2.6.29). We have to check for its existence # and use dmsetup tool instead to get the DM name, uuid and # suspended state if the "dm" subdirectory is not present. # The "suspended" item was added even later (kernels >= 2.6.31), # so we also have to call dmsetup if the kernel version used # is in between these releases. TEST=="dm", ENV{DM_NAME}="$attr{dm/name}", ENV{DM_UUID}="$attr{dm/uuid}", ENV{DM_SUSPENDED}="$attr{dm/suspended}" TEST!="dm", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o name,uuid,suspended" ENV{DM_SUSPENDED}!="?*", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o suspended" # dmsetup tool provides suspended state information in textual # form with values "Suspended"/"Active". We translate it to # 0/1 respectively to be consistent with sysfs values. ENV{DM_SUSPENDED}=="Active", ENV{DM_SUSPENDED}="0" ENV{DM_SUSPENDED}=="Suspended", ENV{DM_SUSPENDED}="1" # This variable provides a reliable way to check that device-mapper # rules were installed. It means that all needed variables are set # by these rules directly so there's no need to acquire them again # later. Other rules can alternate the functionality based on this # fact (e.g. fallback to rules that behave correctly even without # these rules installed). It also provides versioning for any # possible future changes. # VSN 1 - original rules # VSN 2 - add support for synthesized events ENV{DM_UDEV_RULES_VSN}="2" ENV{DM_UDEV_DISABLE_DM_RULES_FLAG}!="1", ENV{DM_NAME}=="?*", SYMLINK+="mapper/$env{DM_NAME}" # Avoid processing and scanning a DM device in the other (foreign) # rules if it is in suspended state. However, we still keep 'disk' # and 'DM subsystem' related rules enabled in this case. ENV{DM_SUSPENDED}=="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" GOTO="dm_end" LABEL="dm_disable" ENV{DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" OPTIONS:="nowatch" LABEL="dm_end" PK �Y�\"��4 13-dm-disk.rulesnu ��6�$ # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules create symlinks in /dev/disk directory. # Symlinks that depend on probing filesystem type, # label and uuid are created only if the device is not # suspended. # "add" event is processed on coldplug only! ACTION=="remove", GOTO="dm_end" ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_end" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="dm_end" SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}" ENV{DM_UUID}=="?*", SYMLINK+="disk/by-id/dm-uuid-$env{DM_UUID}" ENV{DISKSEQ}=="?*", SYMLINK+="disk/by-diskseq/$env{DISKSEQ}" ENV{DM_SUSPENDED}=="1", ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", GOTO="dm_import" ENV{DM_NOSCAN}=="1", ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", GOTO="dm_import" ENV{DM_SUSPENDED}=="1", GOTO="dm_end" ENV{DM_NOSCAN}=="1", GOTO="dm_watch" IMPORT{builtin}="blkid" GOTO="dm_link" LABEL="dm_import" IMPORT{db}="ID_FS_TYPE" IMPORT{db}="ID_FS_USAGE" IMPORT{db}="ID_FS_UUID_ENC" IMPORT{db}="ID_FS_LABEL_ENC" IMPORT{db}="ID_PART_ENTRY_NAME" IMPORT{db}="ID_PART_ENTRY_UUID" IMPORT{db}="ID_PART_ENTRY_SCHEME" IMPORT{db}="ID_PART_GPT_AUTO_ROOT" LABEL="dm_link" ENV{DM_UDEV_LOW_PRIORITY_FLAG}=="1", OPTIONS="link_priority=-100" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_GPT_AUTO_ROOT}=="1", SYMLINK+="gpt-auto-root" # Add inotify watch to track changes on this device. # Using the watch rule is not optimal - it generates a lot of spurious # and useless events whenever the device opened for read-write is closed. # The best would be to generate the event directly in the tool changing # relevant information so only relevant events will be processed # (like creating a filesystem, changing filesystem label etc.). # # But let's use this until we have something better... LABEL="dm_watch" OPTIONS+="watch" LABEL="dm_end" PK �Y�\�I� � 95-dm-notify.rulesnu ��6�$ # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules are responsible for sending a notification to a process # waiting for completion of udev rules. The process is identified by # a cookie value sent within "change" and "remove" events (the cookie # value is set before by that process for every action requested). ENV{DM_COOKIE}=="?*", RUN+="/usr/sbin/dmsetup udevcomplete $env{DM_COOKIE}" PK �Y�\�=[H8 8 91-drm-modeset.rulesnu �[��� KERNEL=="controlD[0-9]*", SUBSYSTEM=="drm", MODE="0600" PK �Y�\�9��� � 11-dm-parts.rulesnu �[��� # Rules for partitions created by kpartx KERNEL!="dm-*", GOTO="dm_parts_end" ACTION!="add|change", GOTO="dm_parts_end" ENV{DM_UUID}!="part[0-9]*", GOTO="dm_parts_end" # We must take care that symlinks don't get lost, # even if blkid fails in 13-dm-disk.rules later. # # Fixme: we have currently no way to avoid calling blkid on # partitions of broken mpath maps such as DM_NOSCAN. # But when partition devices appear, kpartx has likely read # the partition table shortly before, so odds are not bad # that blkid will also succeed. IMPORT{db}="ID_FS_USAGE" IMPORT{db}="ID_FS_UUID_ENC" IMPORT{db}="ID_FS_LABEL_ENC" IMPORT{db}="ID_PART_ENTRY_NAME" IMPORT{db}="ID_PART_ENTRY_UUID" IMPORT{db}="ID_PART_ENTRY_SCHEME" # Maps should take precedence over their members. ENV{DM_UDEV_LOW_PRIORITY_FLAG}!="1", OPTIONS+="link_priority=50" # Set some additional symlinks that typically exist for mpath # path members, too, and should be overridden. # # kpartx_id is very robust, it works for suspended maps and maps # with 0 dependencies. It sets DM_TYPE, DM_PART, DM_WWN IMPORT{program}=="kpartx_id %M %m $env{DM_UUID}" # DM_TYPE only has a reasonable value for partitions on multipath. ENV{DM_UUID}=="*-mpath-*", ENV{DM_TYPE}=="?*", ENV{DM_SERIAL}=="?*" \ SYMLINK+="disk/by-id/$env{DM_TYPE}-$env{DM_SERIAL}-part$env{DM_PART}" ENV{DM_WWN}=="?*", ENV{DM_PART}=="?*", \ SYMLINK+="disk/by-id/wwn-$env{DM_WWN}-part$env{DM_PART}" LABEL="dm_parts_end" PK �Y�\?�p p 66-kpartx.rulesnu �[��� # # persistent links for device-mapper devices # only hardware-backed device-mapper devices (ie multipath, dmraid, # and kpartx) have meaningful persistent device names # KERNEL!="dm-*", GOTO="kpartx_end" ACTION!="add|change", GOTO="kpartx_end" ENV{DM_UUID}!="?*", GOTO="kpartx_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="kpartx_end" # Create dm tables for partitions on multipath devices. ENV{DM_UUID}!="mpath-?*", GOTO="mpath_kpartx_end" # DM_SUBSYSTEM_UDEV_FLAG1 is the "skip_kpartx" flag. # For events not generated by libdevmapper, we need to fetch it from db: # - "change" events with DM_ACTIVATION!="1" (e.g. partition table changes) # - "add" events for which rules are not disabled ("coldplug" case) ENV{DM_ACTIVATION}!="1", IMPORT{db}="DM_SUBSYSTEM_UDEV_FLAG1" ACTION=="add", IMPORT{db}="DM_SUBSYSTEM_UDEV_FLAG1" ENV{DM_SUBSYSTEM_UDEV_FLAG1}=="1", GOTO="mpath_kpartx_end" # 11-dm-mpath.rules sets MPATH_UNCHANGED for events that can be ignored. ENV{MPATH_UNCHANGED}=="1", GOTO="mpath_kpartx_end" # Don't run kpartx now if we know it will fail or hang. ENV{DM_SUSPENDED}=="1", GOTO="mpath_kpartx_end" ENV{DM_NOSCAN}=="1", GOTO="mpath_kpartx_end" # Run kpartx GOTO="run_kpartx" LABEL="mpath_kpartx_end" ## Code for other subsystems (non-multipath) could be placed here ## GOTO="kpartx_end" LABEL="run_kpartx" RUN+="/sbin/kpartx -un /dev/$name" LABEL="kpartx_end" PK �Y�\6�F�v v 68-del-part-nodes.rulesnu �[��� # These rules can delete partitions devnodes for slave devices # for certain aggregate devices such as multipath. # This is desirable to avoid confusion and keep the number # of device nodes and symlinks within limits. # # This is done only once on the first "add" or "change" event for # any given device. # # To suppress this, use the kernel parameter "dont_del_part_nodes", # or create an udev rule file that sets ENV{DONT_DEL_PART_NODES}="1". SUBSYSTEM!="block", GOTO="end_del_part_nodes" KERNEL!="sd*|dasd*", GOTO="end_del_part_nodes" ACTION!="add|change", GOTO="end_del_part_nodes" ENV{DEVTYPE}=="partition", GOTO="end_del_part_nodes" IMPORT{cmdline}="dont_del_part_nodes" ENV{dont_del_part_nodes}=="1", GOTO="end_del_part_nodes" ENV{DONT_DEL_PART_NODES}=="1", GOTO="end_del_part_nodes" # dm-multipath ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="del_part_nodes" # Other aggregate device types can be added here. GOTO="end_del_part_nodes" LABEL="del_part_nodes" IMPORT{db}="DM_DEL_PART_NODES" ENV{DM_DEL_PART_NODES}!="1", ENV{DM_DEL_PART_NODES}="1", \ RUN+="/usr/sbin/partx -d --nr 1-1024 $env{DEVNAME}" LABEL="end_del_part_nodes" PK �Y�\P��� � 60-tpm-udev.rulesnu �[��� # tpm devices can only be accessed by the tss user but the tss # group members can access tpmrm devices KERNEL=="tpm[0-9]*", TAG+="systemd", MODE="0660", OWNER="tss" KERNEL=="tpmrm[0-9]*", TAG+="systemd", MODE="0660", OWNER="tss", GROUP="tss" PK �Y�\��~� � 70-mouse.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="mouse_end" KERNEL!="event*", GOTO="mouse_end" ENV{ID_INPUT_MOUSE}=="", GOTO="mouse_end" # mouse:<subsystem>:v<vid>p<pid>:name:<name>:* KERNELS=="input*", ENV{ID_BUS}=="usb", \ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="mouse_end" KERNELS=="input*", ENV{ID_BUS}=="bluetooth", \ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="mouse_end" DRIVERS=="psmouse", SUBSYSTEMS=="serio", \ IMPORT{builtin}="hwdb 'mouse:ps2::name:$attr{device/name}:'", \ GOTO="mouse_end" LABEL="mouse_end" PK �Y�\�@ @ 70-power-switch.rulesnu �[��� # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="power_switch_end" SUBSYSTEM=="input", KERNEL=="event*", ENV{ID_INPUT_SWITCH}=="1", TAG+="power-switch" SUBSYSTEM=="input", KERNEL=="event*", ENV{ID_INPUT_KEY}=="1", TAG+="power-switch" LABEL="power_switch_end" PK �Y�\���� � 70-touchpad.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="touchpad_end" ENV{ID_INPUT}=="", GOTO="touchpad_end" ENV{ID_INPUT_TOUCHPAD}=="", GOTO="touchpad_end" KERNEL!="event*", GOTO="touchpad_end" # touchpad:<subsystem>:v<vid>p<pid>:name:<name>:* KERNELS=="input*", ENV{ID_BUS}!="", \ IMPORT{builtin}="hwdb 'touchpad:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="touchpad_end" LABEL="touchpad_end" PK �Y�\ �7Ϩ � 70-uaccess.rulesnu �[��� # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="uaccess_end" ENV{MAJOR}=="", GOTO="uaccess_end" # PTP/MTP protocol devices, cameras, portable media players SUBSYSTEM=="usb", ENV{ID_USB_INTERFACES}=="*:060101:*", TAG+="uaccess" # Digicams with proprietary protocol ENV{ID_GPHOTO2}=="?*", TAG+="uaccess" # SCSI and USB scanners ENV{libsane_matched}=="yes", TAG+="uaccess" # HPLIP devices (necessary for ink level check and HP tool maintenance) ENV{ID_HPLIP}=="1", TAG+="uaccess" # optical drives SUBSYSTEM=="block", ENV{ID_CDROM}=="1", TAG+="uaccess" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", TAG+="uaccess" # Sound devices SUBSYSTEM=="sound", TAG+="uaccess", \ OPTIONS+="static_node=snd/timer", OPTIONS+="static_node=snd/seq" # Webcams, frame grabber, TV cards SUBSYSTEM=="video4linux", TAG+="uaccess" SUBSYSTEM=="dvb", TAG+="uaccess" SUBSYSTEM=="media", TAG+="uaccess" # industrial cameras, some webcams, camcorders, set-top boxes, TV sets, audio devices, and more SUBSYSTEM=="firewire", TEST=="units", ENV{IEEE1394_UNIT_FUNCTION_MIDI}=="1", TAG+="uaccess" SUBSYSTEM=="firewire", TEST=="units", ENV{IEEE1394_UNIT_FUNCTION_AUDIO}=="1", TAG+="uaccess" SUBSYSTEM=="firewire", TEST=="units", ENV{IEEE1394_UNIT_FUNCTION_VIDEO}=="1", TAG+="uaccess" # DRI video devices SUBSYSTEM=="drm", KERNEL=="card*", TAG+="uaccess" # smart-card readers ENV{ID_SMARTCARD_READER}=="?*", TAG+="uaccess" # (USB) authentication devices ENV{ID_SECURITY_TOKEN}=="?*", TAG+="uaccess" # PDA devices ENV{ID_PDA}=="?*", TAG+="uaccess" # Programmable remote control ENV{ID_REMOTE_CONTROL}=="1", TAG+="uaccess" # joysticks SUBSYSTEM=="input", ENV{ID_INPUT_JOYSTICK}=="?*", TAG+="uaccess" # color measurement devices ENV{COLOR_MEASUREMENT_DEVICE}=="?*", TAG+="uaccess" # DDC/CI device, usually high-end monitors such as the DreamColor ENV{DDC_DEVICE}=="?*", TAG+="uaccess" # media player raw devices (for user-mode drivers, Android SDK, etc.) SUBSYSTEM=="usb", ENV{ID_MEDIA_PLAYER}=="?*", TAG+="uaccess" # software-defined radio communication devices ENV{ID_SOFTWARE_RADIO}=="?*", TAG+="uaccess" # 3D printers, CNC machines, laser cutters, 3D scanners, etc. ENV{ID_MAKER_TOOL}=="?*", TAG+="uaccess" # Protocol analyzers ENV{ID_SIGNAL_ANALYZER}=="?*", ENV{DEVTYPE}=="usb_device", TAG+="uaccess" ENV{ID_SIGNAL_ANALYZER}=="?*", KERNEL=="ttyACM[0-9]*", TAG+="uaccess" # rfkill / radio killswitches KERNEL=="rfkill", SUBSYSTEM=="misc", TAG+="uaccess" # AV production controllers # Most of these devices use HID for the knobs, faders, buttons, encoders, and jog wheels. SUBSYSTEM=="hidraw", ENV{ID_AV_PRODUCTION_CONTROLLER}=="1", TAG+="uaccess" # Some devices use vendor defined protocols on USB Bulk endpoints for controllers. # Other devices transfer graphics to screens on the device through USB Bulk endpoints. # This also allows accessing HID devices with the libusb backend of hidapi. SUBSYSTEM=="usb", ENV{ID_AV_PRODUCTION_CONTROLLER}=="1", TAG+="uaccess" # USB and Bluetooth controllable lights SUBSYSTEM=="hidraw", ENV{ID_AV_LIGHTS}=="1", TAG+="uaccess" SUBSYSTEM=="usb", ENV{ID_AV_LIGHTS}=="1", TAG+="uaccess" # Hardware wallets SUBSYSTEM=="usb", ENV{ID_HARDWARE_WALLET}=="1", TAG+="uaccess" SUBSYSTEM=="hidraw", ENV{ID_HARDWARE_WALLET}=="1", TAG+="uaccess" # 3D mice # As defined in https://en.wikipedia.org/wiki/3Dconnexion SUBSYSTEM=="hidraw", ENV{ID_INPUT_3D_MOUSE}=="1", TAG+="uaccess" LABEL="uaccess_end" PK �Y�\�ۍX� � 71-seat.rulesnu �[��� # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="seat_end" TAG=="uaccess", SUBSYSTEM!="sound", TAG+="seat" SUBSYSTEM=="sound", KERNEL=="card*", TAG+="seat" SUBSYSTEM=="input", KERNEL=="input*", TAG+="seat" SUBSYSTEM=="graphics", KERNEL=="fb[0-9]*", TAG+="seat" # Assign keyboard and LCD backlights to the seat SUBSYSTEM=="leds", TAG+="seat" SUBSYSTEM=="backlight", TAG+="seat" # Allow efifb / uvesafb to be a master if KMS is disabled SUBSYSTEM=="graphics", KERNEL=="fb[0-9]", IMPORT{cmdline}="nomodeset", TAG+="master-of-seat" # Allow any PCI graphics device to be a master and synthesize a seat if KMS # is disabled and the kernel doesn't have a driver that would work with this device. SUBSYSTEM=="pci", ENV{ID_PCI_CLASS_FROM_DATABASE}=="Display controller", \ ENV{DRIVER}=="", IMPORT{cmdline}="nomodeset", TAG+="seat", TAG+="master-of-seat" # Synthesize a seat for graphic devices without DRM and that fall back to fb # device instead. Such HWs are listed in hwdb. SUBSYSTEM=="graphics", KERNEL=="fb[0-9]*", ATTRS{modalias}=="?*", IMPORT{builtin}="hwdb fb:$attr{modalias}" ENV{ID_TAG_MASTER_OF_SEAT}=="1", TAG+="master-of-seat" SUBSYSTEM=="drm", KERNEL=="card[0-9]*", TAG+="seat", TAG+="master-of-seat" # Allow individual USB ports to be assigned to a seat SUBSYSTEM=="usb", ATTR{bDeviceClass}=="00", TAG+="seat" # Allow USB hubs (and all downstream ports) to be assigned to a seat SUBSYSTEM=="usb", ATTR{bDeviceClass}=="09", TAG+="seat" # 'Plugable' USB hub, sound, network, graphics adapter SUBSYSTEM=="usb", ATTR{idVendor}=="2230", ATTR{idProduct}=="000[13]", ENV{ID_AUTOSEAT}="1" # qemu (version 2.4+) has a PCI-PCI bridge (-device pci-bridge-seat) to group # devices belonging to one seat. See: # http://git.qemu.org/?p=qemu.git;a=blob;f=docs/multiseat.txt SUBSYSTEM=="pci", ATTR{vendor}=="0x1b36", ATTR{device}=="0x000a", TAG+="seat", ENV{ID_AUTOSEAT}="1" # Mimo 720, with integrated USB hub, displaylink graphics, and e2i # touchscreen. This device carries no proper VID/PID in the USB hub, # but it does carry good ID data in the graphics component, hence we # check it from the parent. There's a bit of a race here however, # given that the child devices might not exist yet at the time this # rule is executed. To work around this we'll trigger the parent from # the child if we notice that the parent wasn't recognized yet. # Match parent SUBSYSTEM=="usb", ATTR{idVendor}=="058f", ATTR{idProduct}=="6254", \ ATTR{%k.2/idVendor}=="17e9", ATTR{%k.2/idProduct}=="401a", ATTR{%k.2/product}=="mimo inc", \ ENV{ID_AUTOSEAT}="1", ENV{ID_AVOID_LOOP}="1" # Match child, look for parent's ID_AVOID_LOOP SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \ ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \ IMPORT{parent}="ID_AVOID_LOOP" # Match child, retrigger parent SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \ ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \ ENV{ID_AVOID_LOOP}=="", \ RUN+="/usr/bin/udevadm trigger --parent-match=%p/.." TAG=="seat", ENV{ID_PATH}=="", IMPORT{builtin}="path_id" TAG=="seat", ENV{ID_FOR_SEAT}=="", ENV{ID_PATH_TAG}!="", ENV{ID_FOR_SEAT}="$env{SUBSYSTEM}-$env{ID_PATH_TAG}" SUBSYSTEM=="input", ATTR{name}=="Wiebetech LLC Wiebetech", RUN+="/usr/bin/loginctl lock-sessions" LABEL="seat_end" PK �Y�\l `� � 73-seat-late.rulesnu �[��� # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="seat_late_end" ENV{ID_SEAT}=="", ENV{ID_AUTOSEAT}=="1", ENV{ID_FOR_SEAT}!="", ENV{ID_SEAT}="seat-$env{ID_FOR_SEAT}" ENV{ID_SEAT}=="", IMPORT{parent}="ID_SEAT" ENV{ID_SEAT}!="", TAG+="$env{ID_SEAT}" TAG=="uaccess", ENV{MAJOR}!="", RUN{builtin}+="uaccess" LABEL="seat_late_end" PK �Y�\�\I> 75-net-description.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="net_end" SUBSYSTEM!="net", GOTO="net_end" IMPORT{builtin}="hwdb 'net:naming:dr$env{ID_NET_DRIVER}:'" IMPORT{builtin}="net_id" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" SUBSYSTEMS=="usb", GOTO="net_end" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci" LABEL="net_end" PK �Y�\G�� � 75-probe_mtd.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION!="add", GOTO="mtd_probe_end" KERNEL=="mtd*ro", IMPORT{program}="mtd_probe $devnode" LABEL="mtd_probe_end" PK �Y�\2>��� � 78-sound-card.rulesnu �[��� # do not edit this file, it will be overwritten on update SUBSYSTEM!="sound", GOTO="sound_end" ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change" ACTION!="change", GOTO="sound_end" # Ok, we probably need a little explanation here for what the two lines above # are good for. # # The story goes like this: when ALSA registers a new sound card it emits a # series of 'add' events to userspace, for the main card device and for all the # child device nodes that belong to it. udev relays those to applications, # however only maintains the order between father and child, but not between # the siblings. The control device node creation can be used as synchronization # point. All other devices that belong to a card are created in the kernel # before it. However unfortunately due to the fact that siblings are forwarded # out of order by udev this fact is lost to applications. # # OTOH before an application can open a device it needs to make sure that all # its device nodes are completely created and set up. # # As a workaround for this issue we have added the udev rule above which will # generate a 'change' event on the main card device from the 'add' event of the # card's control device. Due to the ordering semantics of udev this event will # only be relayed after all child devices have finished processing properly. # When an application needs to listen for appearing devices it can hence look # for 'change' events only, and ignore the actual 'add' events. # # When the application is initialized at the same time as a device is plugged # in it may need to figure out if the 'change' event has already been triggered # or not for a card. To find that out we store the flag environment variable # SOUND_INITIALIZED on the device which simply tells us if the card 'change' # event has already been processed. KERNEL!="card*", GOTO="sound_end" ENV{SOUND_INITIALIZED}="1" IMPORT{builtin}="hwdb" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" SUBSYSTEMS=="usb", GOTO="skip_pci" SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", \ ENV{ID_BUS}="firewire", ENV{ID_SERIAL}="$attr{guid}", ENV{ID_SERIAL_SHORT}="$attr{guid}", \ ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{model}", \ ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}" SUBSYSTEMS=="firewire", GOTO="skip_pci" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", GOTO="skip_pci" # If we reach here, the device nor any of its parents are USB/PCI/firewire bus devices. # If we now find a parent that is a platform device, assume that we're working with # an internal sound card. SUBSYSTEMS=="platform", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end" LABEL="skip_pci" # Define ID_ID if ID_BUS and ID_SERIAL are set. This will work for both # USB and firewire. ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}" ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}" IMPORT{builtin}="path_id" # The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept # in sync with those defined for PulseAudio's src/pulse/proplist.h # PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties. # If the first PCM device of this card has the pcm class 'modem', then the card is a modem ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end" # Identify cards on the internal PCI bus as internal SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end" # Devices that also support Image/Video interfaces are most likely webcams SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end" # Matching on the model strings is a bit ugly, I admit ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end" ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end" ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end" ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end" ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end" LABEL="sound_end" PK �Y�\�XE�X X 80-drivers.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION!="add", GOTO="drivers_end" ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load" SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN{builtin}+="kmod load tifm_sd" SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN{builtin}+="kmod load tifm_ms" SUBSYSTEM=="memstick", RUN{builtin}+="kmod load ms_block mspro_block" SUBSYSTEM=="i2o", RUN{builtin}+="kmod load i2o_block" SUBSYSTEM=="module", KERNEL=="parport_pc", RUN{builtin}+="kmod load ppdev" KERNEL=="mtd*ro", ENV{MTD_FTL}=="smartmedia", RUN{builtin}+="kmod load sm_ftl" LABEL="drivers_end" PK �Y�\&��' ' 80-net-setup-link.rulesnu �[��� # do not edit this file, it will be overwritten on update SUBSYSTEM!="net", GOTO="net_setup_link_end" IMPORT{builtin}="path_id" ACTION=="remove", GOTO="net_setup_link_end" IMPORT{builtin}="net_setup_link" NAME=="", ENV{ID_NET_NAME}!="", NAME="$env{ID_NET_NAME}" LABEL="net_setup_link_end" PK �Y�\\\�� 81-net-dhcp.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="net_dhcp_end" SUBSYSTEM!="net", GOTO="net_dhcp_end" # Network interfaces requiring DHCPOFFER messages to be broadcast # must set ID_NET_DHCP_BROADCAST to "1". This property will be # checked by the networkd DHCP4 client to set the DHCP option # s390 ccwgroup interfaces in layer3 mode need broadcast DHCPOFFER # using the link driver to detect this condition ENV{ID_NET_DRIVER}=="qeth_l3", ENV{ID_NET_DHCP_BROADCAST}="1" LABEL="net_dhcp_end" PK �Y�\�g�� � 90-vconsole.rulesnu �[��� # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # Each vtcon keeps its own state of fonts. # ACTION=="add", SUBSYSTEM=="vtconsole", KERNEL=="vtcon*", RUN+="/usr/lib/systemd/systemd-vconsole-setup" PK �Y�\�/�:� � 99-systemd.rulesnu �[��� # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="systemd_end" SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*|ttysclp*|sclp_line*|3270/tty[0-9]*", TAG+="systemd" KERNEL=="vport*", TAG+="systemd" SUBSYSTEM=="ubi", TAG+="systemd" SUBSYSTEM=="block", TAG+="systemd" # We can't make any conclusions about suspended DM devices so let's just import previous SYSTEMD_READY state and skip other rules SUBSYSTEM=="block", ENV{DM_SUSPENDED}=="1", IMPORT{db}="SYSTEMD_READY", GOTO="systemd_end" SUBSYSTEM=="block", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0" # Ignore encrypted devices with no identified superblock on it, since # we are probably still calling mke2fs or mkswap on it. SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0" # Explicitly set SYSTEMD_READY=1 for DM devices that don't have it set yet, so that we always have something to import above SUBSYSTEM=="block", ENV{DM_UUID}=="?*", ENV{SYSTEMD_READY}=="", ENV{SYSTEMD_READY}="1" # add symlink to GPT root disk SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}!="crypto_LUKS", SYMLINK+="gpt-auto-root" SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}=="crypto_LUKS", SYMLINK+="gpt-auto-root-luks" SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{DM_NAME}=="root", SYMLINK+="gpt-auto-root" # Ignore raid devices that are not yet assembled and started SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", TEST!="md/array_state", ENV{SYSTEMD_READY}="0" SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0" # Ignore loop devices that don't have any file attached SUBSYSTEM=="block", KERNEL=="loop[0-9]*", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0" # Ignore nbd devices until the PID file exists (which signals a connected device) SUBSYSTEM=="block", KERNEL=="nbd*", ENV{DEVTYPE}=="disk", TEST!="pid", ENV{SYSTEMD_READY}="0" # We need a hardware independent way to identify network devices. We # use the /sys/subsystem/ path for this. Kernel "bus" and "class" names # should be treated as one namespace, like udev handles it. This is mostly # just an identification string for systemd, so whether the path actually is # accessible or not does not matter as long as it is unique and in the # filesystem namespace. SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name" SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k", \ ENV{SYSTEMD_WANTS}+="bluetooth.target", ENV{SYSTEMD_USER_WANTS}+="bluetooth.target" ENV{ID_SMARTCARD_READER}=="?*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target", ENV{SYSTEMD_USER_WANTS}+="smartcard.target" SUBSYSTEM=="sound", KERNEL=="controlC*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target", ENV{SYSTEMD_USER_WANTS}+="sound.target" SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target", ENV{SYSTEMD_USER_WANTS}+="printer.target" SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target", ENV{SYSTEMD_USER_WANTS}+="printer.target" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target", ENV{SYSTEMD_USER_WANTS}+="printer.target" SUBSYSTEM=="udc", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="usb-gadget.target" # Apply sysctl variables to network devices (and only to those) as they appear. ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name" # Pull in backlight save/restore for all backlight devices and # keyboard backlights SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service" SUBSYSTEM=="leds", KERNEL=="*kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service" # Pull in rfkill save/restore for all rfkill devices SUBSYSTEM=="rfkill", ENV{SYSTEMD_RFKILL}="1" SUBSYSTEM=="rfkill", IMPORT{builtin}="path_id" SUBSYSTEM=="misc", KERNEL=="rfkill", TAG+="systemd", ENV{SYSTEMD_WANTS}+="systemd-rfkill.socket" # Asynchronously mount file systems implemented by these modules as soon as they are loaded. SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount" SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount" LABEL="systemd_end" PK �Y�\e���� � READMEnu �[��� Files in this directory contain configuration for systemd-udevd.service, a daemon that manages symlinks to device nodes, permissions of devices nodes, emits device events for userspace, and renames network interfaces. See man:udev(7) for an overview of the configuration file format, and man:systemd-udevd.service(8) for a description of service itself. Use 'systemd-analyze cat-config udev/rules.d' to display the effective config. PK �Y�\�� 70-nvmf-keys.rulesnu �[��� # # nvmf-keys.rules: # Load pre-shared keys into the kernel keyring when # the PSK keyring module gets loaded. # # ACTION=="add", SUBSYSTEM=="module", KERNEL=="nvme_tcp", TEST=="/etc/nvme/tls-keys", RUN+="/usr/sbin/nvme tls --import --keyfile /etc/nvme/tls-keys" PK �Y�\��u5 u5 90-pipewire-alsa.rulesnu �[��� # do not edit this file, it will be overwritten on update # This file is part of PipeWire adapted from PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as # published by the Free Software Foundation; either version 2.1 of the # License, or (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. SUBSYSTEM!="sound", GOTO="pipewire_end" ACTION!="change", GOTO="pipewire_end" KERNEL!="card*", GOTO="pipewire_end" SUBSYSTEMS=="usb", GOTO="pipewire_check_usb" SUBSYSTEMS=="firewire", GOTO="pipewire_firewire_quirk" SUBSYSTEMS=="pci", GOTO="pipewire_check_pci" SUBSYSTEMS=="platform", DRIVERS=="thinkpad_acpi", ENV{ACP_IGNORE}="1" # Force enable speaker and internal mic for some laptops # This should only be necessary for kernels 3.3, 3.4 and 3.5 (as they are lacking the phantom jack kctls). # Acer AOA150 ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x015b", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Acer Aspire 4810TZ ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x022a", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Packard bell dot m/a ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x028c", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Acer Aspire 1810TZ ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x029b", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Acer AOD260 and AO532h ATTRS{subsystem_vendor}=="0x1025", ATTRS{subsystem_device}=="0x0349", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell MXC051 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01b5", ENV{ACP_PROFILE_SET}="force-speaker.conf" # Dell Inspiron 6400 and E1505 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01bd", ENV{ACP_PROFILE_SET}="force-speaker.conf" # Dell Latitude D620 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01c2", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell Latitude D820 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01cc", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell Latitude D520 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01d4", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell Latitude D420 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x01d6", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell Inspiron 1525 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x022f", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell Inspiron 1011 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x02f4", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell XPS 14 (L401X) ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0468", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell XPS 15 (L501X) ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x046e", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell XPS 15 (L502X) ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x050e", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Dell Inspiron 3420 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0553", ENV{ACP_PROFILE_SET}="force-speaker.conf" # Dell Inspiron 3520 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0555", ENV{ACP_PROFILE_SET}="force-speaker.conf" # Dell Vostro 2420 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0556", ENV{ACP_PROFILE_SET}="force-speaker.conf" # Dell Vostro 2520 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0558", ENV{ACP_PROFILE_SET}="force-speaker.conf" # Dell Inspiron One 2020 ATTRS{subsystem_vendor}=="0x1028", ATTRS{subsystem_device}=="0x0579", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Asus 904HA (1000H) ATTRS{subsystem_vendor}=="0x1043", ATTRS{subsystem_device}=="0x831a", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Asus T101MT ATTRS{subsystem_vendor}=="0x1043", ATTRS{subsystem_device}=="0x83ce", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Sony Vaio VGN-SR21M ATTRS{subsystem_vendor}=="0x104d", ATTRS{subsystem_device}=="0x9033", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Sony Vaio VPC-W115XG ATTRS{subsystem_vendor}=="0x104d", ATTRS{subsystem_device}=="0x9064", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Fujitsu Lifebook S7110 ATTRS{subsystem_vendor}=="0x10cf", ATTRS{subsystem_device}=="0x1397", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Fujitsu Lifebook A530 ATTRS{subsystem_vendor}=="0x10cf", ATTRS{subsystem_device}=="0x1531", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Toshiba A200 ATTRS{subsystem_vendor}=="0x1179", ATTRS{subsystem_device}=="0xff00", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # MSI X360 ATTRS{subsystem_vendor}=="0x1462", ATTRS{subsystem_device}=="0x1053", ENV{ACP_PROFILE_SET}="force-speaker-and-int-mic.conf" # Lenovo 3000 Y410 ATTRS{subsystem_vendor}=="0x17aa", ATTRS{subsystem_device}=="0x384e", ENV{ACP_PROFILE_SET}="force-speaker.conf" GOTO="pipewire_end" LABEL="pipewire_check_usb" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{ACP_PROFILE_SET}="native-instruments-audio8dj.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="0839", ENV{ACP_PROFILE_SET}="native-instruments-audio4dj.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="baff", ENV{ACP_PROFILE_SET}="native-instruments-traktorkontrol-s4.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="4711", ENV{ACP_PROFILE_SET}="native-instruments-korecontroller.conf" # This ID 17cc:041c is verified for the older Audio 2 DJ model (pre-2014 ish). ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="041c", ENV{ACP_PROFILE_SET}="native-instruments-traktor-audio2.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="041d", ENV{ACP_PROFILE_SET}="native-instruments-traktor-audio2.conf" # There appear to be two IDs in use for Traktor Audio 6 (or maybe 17cc:1011 # is just incorrect - 17cc:1010 has been verified to be correct at least # for some hardware). ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1010", ENV{ACP_PROFILE_SET}="native-instruments-traktor-audio6.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1011", ENV{ACP_PROFILE_SET}="native-instruments-traktor-audio6.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1001", ENV{ACP_PROFILE_SET}="native-instruments-komplete-audio6.conf" # This entry is for the Komplete Audio 6 MK2, which has a different ID, but is functionally identical to the Komplete Audio 6. ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1870", ENV{ACP_PROFILE_SET}="native-instruments-komplete-audio6.conf" ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1021", ENV{ACP_PROFILE_SET}="native-instruments-traktor-audio10.conf" ATTRS{idVendor}=="0763", ATTRS{idProduct}=="2012", ENV{ACP_PROFILE_SET}="maudio-fasttrack-pro.conf" ATTRS{idVendor}=="045e", ATTRS{idProduct}=="02bb", ENV{ACP_PROFILE_SET}="kinect-audio.conf" ATTRS{idVendor}=="041e", ATTRS{idProduct}=="322c", ENV{ACP_PROFILE_SET}="sb-omni-surround-5.1.conf" ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="4014", ENV{ACP_PROFILE_SET}="dell-dock-tb16-usb-audio.conf" ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="402e", ENV{ACP_PROFILE_SET}="dell-dock-tb16-usb-audio.conf" ATTRS{idVendor}=="08bb", ATTRS{idProduct}=="2902", ENV{ACP_PROFILE_SET}="texas-instruments-pcm2902.conf" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0269", ENV{ACP_PROFILE_SET}="hp-tbt-dock-120w-g2.conf" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0567", ENV{ACP_PROFILE_SET}="hp-tbt-dock-audio-module.conf" # ID 1038:12ad is for the 2018 refresh of the Arctis 7. # ID 1038:1294 is for Arctis Pro Wireless (which works with the Arctis 7 configuration). ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1260", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" ATTRS{idVendor}=="1038", ATTRS{idProduct}=="12ad", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1294", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1730", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 1038:1282 is for SteelSeries GameDAC ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1282", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 1038:12c4 is for Arctis 9 ATTRS{idVendor}=="1038", ATTRS{idProduct}=="12c4", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # Lucidsound LS31 ATTRS{idVendor}=="2f12", ATTRS{idProduct}=="0109", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 9886:002c is for the Astro A50 Gen4 ATTRS{idVendor}=="9886", ATTRS{idProduct}=="002c", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 9886:0038 is for the Astro Mixamp Pro TR ATTRS{idVendor}=="9886", ATTRS{idProduct}=="0038", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 9886:0045 is for the Astro A20 Gen2 ATTRS{idVendor}=="9886", ATTRS{idProduct}=="0045", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 1532:0520 is for the Razer Kraken Tournament Edition ATTRS{idVendor}=="1532", ATTRS{idProduct}=="0520", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 1532:0579 is Razer BlackShark v3 (usb direct to headset) ATTRS{idVendor}=="1532", ATTRS{idProduct}=="0579", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 1532:057a is Razer BlackShark v3 (2.4GHz dongle) ATTRS{idVendor}=="1532", ATTRS{idProduct}=="057a", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # ID 1038:1250 is for the Arctis 5 # ID 1037:12aa is for the Arctis 5 2019 # ID 1038:1252 is for the Arctis Pro 2019 edition ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1250", ENV{ACP_PROFILE_SET}="steelseries-arctis-common-usb-audio.conf" ATTRS{idVendor}=="1038", ATTRS{idProduct}=="12aa", ENV{ACP_PROFILE_SET}="steelseries-arctis-common-usb-audio.conf" ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1252", ENV{ACP_PROFILE_SET}="steelseries-arctis-common-usb-audio.conf" ATTRS{idVendor}=="147a", ATTRS{idProduct}=="e055", ENV{ACP_PROFILE_SET}="cmedia-high-speed-true-hdaudio.conf" # HyperX Cloud Orbit S has three modes. Each mode has a separate product ID. # ID_SERIAL for this device is the device name + mode repeated three times. # ID_SERIAL is used for the ID_ID property, and the ID_ID property is used in # the card name in PulseAudio. The resulting card name is too long for the name # length limit, so we set a more sensible ID_ID here (the same as the default # ID_ID, but without repetition in the serial part). ATTRS{idVendor}=="0951", ATTRS{idProduct}=="16ff", ENV{ID_ID}="usb-HyperX_Cloud_Orbit_S_2Ch-$env{ID_USB_INTERFACE_NUM}" ATTRS{idVendor}=="0951", ATTRS{idProduct}=="1702", ENV{ID_ID}="usb-HyperX_Cloud_Orbit_S_Hi-Res_2Ch-$env{ID_USB_INTERFACE_NUM}" ATTRS{idVendor}=="0951", ATTRS{idProduct}=="1703", ENV{ID_ID}="usb-HyperX_Cloud_Orbit_S_3D_8Ch-$env{ID_USB_INTERFACE_NUM}" # OnePlus Type-C Bullets (ED117) ATTRS{idVendor}=="2a70", ATTRS{idProduct}=="1881", ENV{ACP_PROFILE_SET}="simple-headphones-mic.conf" # ID 1395:005e is for Sennheiser GSX 1000 # ID 1395:00a0 is for Sennheiser GSX 1000 # ID 1395:00b1 is for Sennheiser GSX 1000 v2 # ID 1395:005f is for Sennheiser GSX 1200 # ID 1395:00a1 is for Sennheiser GSX 1200 ATTRS{idVendor}=="1395", ATTRS{idProduct}=="005e", ENV{ACP_PROFILE_SET}="sennheiser-gsx.conf" ATTRS{idVendor}=="1395", ATTRS{idProduct}=="00a0", ENV{ACP_PROFILE_SET}="sennheiser-gsx.conf" ATTRS{idVendor}=="1395", ATTRS{idProduct}=="00b1", ENV{ACP_PROFILE_SET}="sennheiser-gsx.conf" ATTRS{idVendor}=="1395", ATTRS{idProduct}=="005f", ENV{ACP_PROFILE_SET}="sennheiser-gsx.conf" ATTRS{idVendor}=="1395", ATTRS{idProduct}=="00a1", ENV{ACP_PROFILE_SET}="sennheiser-gsx.conf" # Sennheiser GSA 70 wireless USB dongle for GSP 670 ATTRS{idVendor}=="1395", ATTRS{idProduct}=="0089", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # EPOS GSA 70 wireless USB dongle for GSP 670 (Sennheiser GSA 70 with updated firmware) ATTRS{idVendor}=="1395", ATTRS{idProduct}=="0300", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # Sennheiser GSP 670 USB headset ATTRS{idVendor}=="1395", ATTRS{idProduct}=="008a", ENV{ACP_PROFILE_SET}="usb-gaming-headset.conf" # Audioengine HD3 powered speakers support IEC958 but don't actually # have any digital outputs. ATTRS{idVendor}=="0a12", ATTRS{idProduct}=="4007", ENV{ACP_PROFILE_SET}="analog-only.conf" # Asus Xonar SE ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="189d", ENV{ACP_PROFILE_SET}="asus-xonar-se.conf" GOTO="pipewire_end" LABEL="pipewire_check_pci" # Creative SoundBlaster Audigy-based cards # EMU10k2/CA0100/CA0102/CA10200 ATTRS{vendor}=="0x1102", ATTRS{device}=="0x0004", ENV{ACP_PROFILE_SET}="audigy.conf" # CA0108/CA10300 ATTRS{vendor}=="0x1102", ATTRS{device}=="0x0008", ENV{ACP_PROFILE_SET}="audigy.conf" GOTO="pipewire_end" LABEL="pipewire_firewire_quirk" # Focusrite Saffire Pro 10 i/o and Pro 26 i/o have a quirk to disappear from # IEEE 1394 bus when breaking connections. This brings an issue for PulseAudio # to continue the routine for ever that: # - detecting sound card # - starting PCM substream # - stopping the PCM substream # - the card disappears # - the card appears # In detail, see: https://bugzilla.kernel.org/show_bug.cgi?id=199365 ATTRS{vendor}=="0x00130e", ATTRS{model}=="0x00000[36]", ATTRS{units}=="0x00a02d:0x010001", ENV{ACP_IGNORE}="1" LABEL="pipewire_end" PK �Y�\� � 84-nm-drivers.rulesnu �[��� # Do not modify this file, it will get overwritten on updates. # To override or extend the rules place a file in /etc/udev/rules.d SUBSYSTEM!="net", GOTO="nm_drivers_end" ACTION!="add|change|move", GOTO="nm_drivers_end" # Determine ID_NET_DRIVER if there's no ID_NET_DRIVER or DRIVERS (old udev?) ENV{ID_NET_DRIVER}=="?*", GOTO="nm_drivers_end" DRIVERS=="?*", GOTO="nm_drivers_end" PROGRAM="/bin/sh -c '/usr/sbin/ethtool -i $$1 |/usr/bin/sed -n s/^driver:\ //p' -- $env{INTERFACE}", ENV{ID_NET_DRIVER}="%c" LABEL="nm_drivers_end" PK �Y�\ ���L L 90-nm-thunderbolt.rulesnu �[��� # Do not modify this file, it will get overwritten on updates. # To override or extend the rules place a file in /etc/udev/rules.d ACTION!="add|change|move", GOTO="nm_thunderbolt_end" # Load he thunderbolt-net driver if we a device of type thunderbolt_xdomain # is added. SUBSYSTEM=="thunderbolt", ENV{DEVTYPE}=="thunderbolt_xdomain", RUN{builtin}+="kmod load thunderbolt-net" # For all thunderbolt network devices, we want to enable link-local configuration SUBSYSTEM=="net", ENV{ID_NET_DRIVER}=="thunderbolt-net", ENV{NM_AUTO_DEFAULT_LINK_LOCAL_ONLY}="1" LABEL="nm_thunderbolt_end" PK �Y�\�qE� � 98-kexec.rulesnu �[��� # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="cpu", ACTION=="add", GOTO="kdump_reload" SUBSYSTEM=="cpu", ACTION=="remove", GOTO="kdump_reload" SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload" SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload" GOTO="kdump_reload_end" LABEL="kdump_reload" # If kdump is not loaded, calling kdump-udev-throttle will end up # doing nothing, but systemd-run will always generate extra logs for # each call, so trigger the kdump-udev-throttler only if kdump # service is active to avoid unnecessary logs RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" LABEL="kdump_reload_end" PK �Y�\�� � � 40-usb-blacklist.rulesnu �[��� # # Blacklist specific USB devices # # don't inquire sn and di on broken devices (https://bugzilla.suse.com/show_bug.cgi?id=840054) ACTION!="add|change", GOTO="usb_blacklist_end" KERNEL!="sd*[!0-9]|sr*", GOTO="usb_blacklist_end" # unknown device ATTRS{idVendor}=="0aec", ATTRS{idProduct}=="3260", ENV{ID_SCSI_INQUIRY}="1" # Sony/JMicron port replicator ATTRS{idVendor}=="054c", ATTRS{idProduct}=="06a0", ENV{ID_SCSI_INQUIRY}="1" LABEL="usb_blacklist_end" PK �Y�\wf �� � 61-scsi-sg3_id.rulesnu �[��� # SCSI-ID mappings for sg3_utils ACTION=="remove", GOTO="sg3_utils_id_end" SUBSYSTEM=="block", GOTO="block_dev" # SCSI devices other than "block" # This code used to live in 60-persistent-storage-tape.rules. # type 8 devices are "Medium Changers" SUBSYSTEM=="scsi_generic", KERNEL=="sg*[0-9]", ATTRS{type}=="8", \ GOTO="scsi_inquiry" SUBSYSTEM=="scsi_changer", KERNEL=="sch*[0-9]", ATTRS{type}=="8", \ ENV{.INQUIRY_DEV}="$root/bsg/$id", GOTO="scsi_inquiry" # tapes need to be accessed through their bsg device KERNEL=="st*[0-9]|nst*[0-9]", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", \ ENV{.INQUIRY_DEV}="$root/bsg/$id", GOTO="scsi_inquiry" GOTO="sg3_utils_id_end" LABEL="block_dev" # Import values for partitions ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_SCSI", IMPORT{parent}="SCSI_*" ENV{DEVTYPE}=="partition", ENV{ID_SCSI}=="1", GOTO="compat" # Handle non-SCSI devices that implement SCSI inquiry KERNEL=="cciss*", ENV{DEVTYPE}=="disk", GOTO="sg_inquiry" # Ignore everything else except sd/sr KERNEL!="sd*[!0-9]|sr*", GOTO="sg3_utils_id_end" # SCSI INQUIRY values # If the 'inquiry' sysfs attribute is present the kernel will already # have scanned for VPD pages, so if the vpd page attribute is not # present it is not supported (or deemed unsafe to access). # Hence we can skip the call to sg_inq and avoid I/O altogether. # Set 'ID_SCSI_INQUIRY=0' in an earlier udev rule if the kernel # fails to scan VPD pages correctly; the rules will then fall # back to calling sg_vpd directly. LABEL="scsi_inquiry" ENV{ID_SCSI_INQUIRY}=="0", GOTO="sg_inquiry" # "inquiry" is an attribute of the scsi_device in sysfs, # we obtain it by using $id after an ATTRS match. SUBSYSTEMS=="scsi", ATTRS{inquiry}=="*", KERNELS=="[0-9]*:*[0-9]", \ ENV{.SYSFS_PATH}="$sys/class/scsi_device/$id/device" ENV{.SYSFS_PATH}=="", GOTO="sg_inquiry" IMPORT{program}="/usr/bin/sg_inq --export --inhex=$env{.SYSFS_PATH}/inquiry --raw", \ ENV{ID_SCSI}="1", ENV{ID_SCSI_INQUIRY}="1" # If inquiry sysfs attribute reading it failed, fallback to sg ENV{ID_SCSI}!="1", GOTO="sg_inquiry" # Read VPD pages 80 (sn) and 83 (di) IMPORT{program}="/usr/bin/sg_inq --export --inhex=$env{.SYSFS_PATH}/vpd_pg80 --raw" IMPORT{program}="/usr/bin/sg_inq --export --inhex=$env{.SYSFS_PATH}/vpd_pg83 --raw" GOTO="compat" LABEL="sg_inquiry" # Handle devices that have no inquiry attributes in sysfs ENV{.INQUIRY_DEV}=="", ENV{.INQUIRY_DEV}="$tempnode" IMPORT{program}="/usr/bin/sg_inq --export $env{.INQUIRY_DEV}", ENV{ID_SCSI}="1" # Give up if this fails, too ENV{ID_SCSI}!="1", GOTO="sg3_utils_id_end" IMPORT{program}="/usr/bin/sg_inq --export --page=sn $env{.INQUIRY_DEV}" IMPORT{program}="/usr/bin/sg_inq --export --page=di $env{.INQUIRY_DEV}" LABEL="compat" # scsi_id compat mappings ENV{ID_VENDOR}!="?*", ENV{SCSI_VENDOR}=="?*", ENV{ID_VENDOR}="$env{SCSI_VENDOR}" ENV{ID_VENDOR_ENC}!="?*", ENV{SCSI_VENDOR_ENC}=="?*", ENV{ID_VENDOR_ENC}="$env{SCSI_VENDOR_ENC}" ENV{ID_MODEL}!="?*", ENV{SCSI_MODEL}=="?*", ENV{ID_MODEL}="$env{SCSI_MODEL}" ENV{ID_MODEL_ENC}!="?*", ENV{SCSI_MODEL_ENC}=="?*", ENV{ID_MODEL_ENC}="$env{SCSI_MODEL_ENC}" ENV{ID_REVISION}!="?*", ENV{SCSI_REVISION}=="?*", ENV{ID_REVISION}="$env{SCSI_REVISION}" ENV{ID_TYPE}!="?*", ENV{SCSI_TYPE}=="?*", ENV{ID_TYPE}="$env{SCSI_TYPE}" ENV{ID_TARGET_PORT}!="?*", ENV{SCSI_IDENT_PORT_TARGET_PORT_GROUP}=="?*", \ PROGRAM="/bin/sh -c 'echo $env{SCSI_IDENT_PORT_TARGET_PORT_GROUP} | /bin/sed s/^0x//'", \ ENV{ID_TARGET_PORT}="$result" # ID_WWN compat mapping ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_REG}" ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_LOCAL}" # ID_WWN has max 16 characters ENV{ID_WWN_WITH_EXTENSION}=="?*", ENV{ID_WWN}!="?*", \ PROGRAM="/bin/sh -c 'echo $env{ID_WWN_WITH_EXTENSION} | /bin/sed s/^\\\(0x.\\\{1,16\\\}\\\).*/\\1/'", \ ENV{ID_WWN}="$result" # ata_id compatibility ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_ATA}=="?*", ENV{ID_BUS}="ata", ENV{ID_ATA}="1", ENV{ID_SERIAL}="$env{SCSI_IDENT_LUN_ATA}" ENV{ID_SERIAL_SHORT}!="?*", ENV{SCSI_VENDOR}=="ATA", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}" # Compat ID_SERIAL setting ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_REGEXT}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_REG}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_REG}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_EXT}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="2$env{SCSI_IDENT_LUN_EUI64}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_EUI64}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="8$env{SCSI_IDENT_LUN_NAME}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAME}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="1$env{SCSI_IDENT_LUN_T10}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_T10}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_LOCAL}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_LOCAL}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_SERIAL}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_SERIAL}" # Compat ID_SCSI_SERIAL setting ENV{ID_SCSI_SERIAL}!="?*", ENV{SCSI_IDENT_SERIAL}=="?*", ENV{ID_SCSI_SERIAL}="$env{SCSI_IDENT_SERIAL}" LABEL="sg3_utils_id_end" PK �Y�\I�� � 63-scsi-sg3_symlink.rulesnu �[��� # SCSI-ID symlinks for sg3_utils ACTION=="remove", GOTO="sg3_utils_symlink_end" SUBSYSTEM!="block", GOTO="sg3_utils_symlink_end" ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="sg3_utils_symlink_end" # Skip symlink generation for multipath ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="sg3_utils_symlink_end" # Select which identifier to use per default # 0: vpd page 0x80 identifier ENV{SCSI_IDENT_SERIAL}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}" ENV{SCSI_IDENT_SERIAL}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}-part%n" # NAA identifier (prefix 3) # 1: IEEE Registered Extended first ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REGEXT}-part%n" # 2: IEEE Registered ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REG}" ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REG}-part%n" # 3: IEEE Extended ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_EXT}-part%n" # 4: EUI-64 identifier (prefix 2) ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-2$env{SCSI_IDENT_LUN_EUI64}" ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-2$env{SCSI_IDENT_LUN_EUI64}-part%n" # 5: SCSI name identifier (prefix 8) ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-8$env{SCSI_IDENT_LUN_NAME}" ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-8$env{SCSI_IDENT_LUN_NAME}-part%n" # 6: T10 Vendor identifier (prefix 1) ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-1$env{SCSI_IDENT_LUN_T10}" ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-1$env{SCSI_IDENT_LUN_T10}-part%n" # 7: IEEE Locally assigned ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_LOCAL}" ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_LOCAL}-part%n" # 8: Vendor-specific identifier (prefix 0) ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}" ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}-part%n" LABEL="sg3_utils_symlink_end" PK �Y�\l �� � 70-nvmf-autoconnect.rulesnu �[��� # # nvmf-autoconnect.rules: # Handles udev events which invoke automatically scan via discovery # controller and connect to elements in the discovery log. # # ACTION!="change", GOTO="autoconnect_end" # For backwards compatibility. Make sure HOST_IFACE is not an empty string. ENV{NVME_HOST_IFACE}=="", ENV{NVME_HOST_IFACE}="none" # Events from persistent discovery controllers or nvme-fc transport events # NVME_AEN: # type 0x2 (NOTICE) info 0xf0 (DISCOVERY_LOG_CHANGE) log-page-id 0x70 (DISCOVERY_LOG_PAGE) ACTION=="change", SUBSYSTEM=="nvme", ENV{NVME_AEN}=="0x70f002", \ ENV{NVME_TRTYPE}=="*", ENV{NVME_TRADDR}=="*", \ ENV{NVME_TRSVCID}=="*", ENV{NVME_HOST_TRADDR}=="*", ENV{NVME_HOST_IFACE}=="*", \ RUN+="/usr/bin/systemctl --no-block restart nvmf-connect@--device\x3d$kernel\t--transport\x3d$env{NVME_TRTYPE}\t--traddr\x3d$env{NVME_TRADDR}\t--trsvcid\x3d$env{NVME_TRSVCID}\t--host-traddr\x3d$env{NVME_HOST_TRADDR}\t--host-iface\x3d$env{NVME_HOST_IFACE}.service" # nvme-fc transport generated events (old-style for compatibility) ACTION=="change", SUBSYSTEM=="fc", ENV{FC_EVENT}=="nvmediscovery", \ ENV{NVMEFC_HOST_TRADDR}=="*", ENV{NVMEFC_TRADDR}=="*", \ RUN+="/usr/bin/systemctl --no-block restart nvmf-connect@--device\x3dnone\t--transport\x3dfc\t--traddr\x3d$env{NVMEFC_TRADDR}\t--trsvcid\x3dnone\t--host-traddr\x3d$env{NVMEFC_HOST_TRADDR}.service" # A discovery controller just (re)connected, re-read the discovery log change to # check if there were any changes since it was last connected. ACTION=="change", SUBSYSTEM=="nvme", ENV{NVME_EVENT}=="rediscover", ATTR{cntrltype}=="discovery", \ ENV{NVME_TRTYPE}=="*", ENV{NVME_TRADDR}=="*", \ ENV{NVME_TRSVCID}=="*", ENV{NVME_HOST_TRADDR}=="*", ENV{NVME_HOST_IFACE}=="*", \ RUN+="/usr/bin/systemctl --no-block restart nvmf-connect@--device\x3d$kernel\t--transport\x3d$env{NVME_TRTYPE}\t--traddr\x3d$env{NVME_TRADDR}\t--trsvcid\x3d$env{NVME_TRSVCID}\t--host-traddr\x3d$env{NVME_HOST_TRADDR}\t--host-iface\x3d$env{NVME_HOST_IFACE}.service" LABEL="autoconnect_end" PK �Y�\�1bw_ _ 99-nfs.rulesnu �[��� SUBSYSTEM=="bdi", ACTION=="add", PROGRAM="/usr/libexec/nfsrahead %k", ATTR{read_ahead_kb}="%c" PK �Y�\���A A 01-md-raid-creating.rulesnu �[��� # do not edit this file, it will be overwritten on update # While mdadm is creating an array, it creates a file # /run/mdadm/creating-mdXXX. If that file exists, then # the array is not "ready" and we should make sure the # content is ignored. KERNEL=="md*", TEST=="/run/mdadm/creating-$kernel", ENV{SYSTEMD_READY}="0" PK �Y�\Y8�-& & 63-md-raid-arrays.rulesnu �[��� # do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="md_end" # handle md arrays ACTION=="remove", GOTO="md_end" KERNEL!="md*", GOTO="md_end" # partitions have no md/{array_state,metadata_version}, but should not # for that reason be ignored. ENV{DEVTYPE}=="partition", GOTO="md_ignore_state" # container devices have a metadata version of e.g. 'external:ddf' and # never leave state 'inactive' ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state" TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end" ATTR{md/array_state}=="clear*|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end" LABEL="md_ignore_state" IMPORT{program}="/usr/sbin/mdadm --detail --no-devices --export $devnode" ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace" ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}" ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}" ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace" ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n" ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n" ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n" IMPORT{builtin}="blkid" OPTIONS+="link_priority=100" OPTIONS+="watch" OPTIONS+="db_persist" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" ENV{MD_LEVEL}=="raid[1-9]*", ENV{SYSTEMD_WANTS}+="mdmonitor.service" # Tell systemd to run mdmon for our container, if we need it. ENV{MD_LEVEL}=="raid[1-9]*", ENV{MD_CONTAINER}=="?*", PROGRAM="/usr/bin/readlink $env{MD_CONTAINER}", ENV{MD_MON_THIS}="%c" ENV{MD_MON_THIS}=="?*", TEST=="/etc/initrd-release", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@initrd-%c.service" ENV{MD_MON_THIS}=="?*", TEST!="/etc/initrd-release", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@%c.service" ENV{MD_RESHAPE_ACTIVE}=="True", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdadm-grow-continue@%c.service" LABEL="md_end" PK �Y�\�" 66-md-auto-readd.rulesnu �[��� # # Enable/Disable - default is Disabled # to disable this rule, GOTO="md_end" should be the first active command. # to enable this rule, Comment out GOTO="md_end". GOTO="md_end" # Required: MD arrays must have a bitmap for transient devices to # be added back in the array. # mdadm -CR /dev/md0 -l1 -n2 /dev/sd[ab] –bitmap=internal # Don't process any events if anaconda is running as anaconda brings up # raid devices manually ENV{ANACONDA}=="?*", GOTO="md_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_end" # We process add events on block devices (since they are ready as soon as # they are added to the system) ACTION!="add", GOTO="md_end" ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end" SUBSYSTEM=="block", RUN{program}+="/usr/sbin/md-auto-readd.sh $devnode" # # Land here to exit cleanly LABEL="md_end" PK �Y�\LJv v 65-persistent-net-nbft.rulesnu �[��� # Avoid renaming nbft$X interfaces SUBSYSTEM=="net", ACTION!="remove", ENV{INTERFACE}=="nbft*", NAME:="%E{INTERFACE}" PK �Y�\�o�n 71-nvmf-netapp.rulesnu �[��� # Set appropriate iopolicy for NetApp ONTAP and NetApp E-Series ACTION=="add", SUBSYSTEM=="nvme-subsystem", ATTR{subsystype}=="nvm", ATTR{model}=="NetApp ONTAP Controller", ATTR{iopolicy}="queue-depth" ACTION=="add", SUBSYSTEM=="nvme-subsystem", ATTR{subsystype}=="nvm", ATTR{model}=="NetApp E-Series", ATTR{iopolicy}="round-robin" # Set ctrl_loss_tmo to -1 for NetApp ONTAP NVMe/TCP ACTION!="remove", SUBSYSTEM=="nvme", KERNEL=="nvme*", ATTR{transport}=="tcp", ATTR{model}=="NetApp ONTAP Controller", ATTR{ctrl_loss_tmo}="-1" PK �Y�\��P P 71-nvmf-vastdata.rulesnu �[��� # Enable round-robin for Vast Data Block Subsystem ACTION=="add", SUBSYSTEM=="nvme-subsystem", ATTR{subsystype}=="nvm", ATTR{model}=="VASTData", ATTR{iopolicy}="round-robin" # Set ctrl_loss_tmo to -1 for Vast Data Block Controller ACTION!="remove", SUBSYSTEM=="nvme", KERNEL=="nvme*", ATTR{model}=="VASTData", ATTR{ctrl_loss_tmo}="-1" PK �Y�\g-}�� � 40-elevator.rulesnu �[��� # We aren't adding devices skip the elevator check ACTION!="add", GOTO="sched_out" SUBSYSTEM!="block", GOTO="sched_out" ENV{DEVTYPE}!="disk", GOTO="sched_out" # Technically, dm-multipath can be configured to use an I/O scheduler. # However, there are races between the 'add' uevent and the linking in # of the queue/scheduler sysfs file. For now, just skip dm- devices. KERNEL=="dm-*|md*", GOTO="sched_out" # Skip bio-based devices, which don't support an I/O scheduler. ATTR{queue/scheduler}=="none", GOTO="sched_out" # If elevator= is specified on the kernel command line, change the # scheduler to the one specified. IMPORT{cmdline}="elevator" ENV{elevator}!="", ATTR{queue/scheduler}="$env{elevator}" LABEL="sched_out"PK �Y�\�_�&� � 40-redhat.rulesnu �[��� # do not edit this file, it will be overwritten on update # CPU hotadd request SUBSYSTEM!="cpu", GOTO="cpu_online_end" ACTION!="add", GOTO="cpu_online_end" CONST{arch}=="ppc64*", GOTO="cpu_online_end" CONST{arch}=="s390*", ATTR{configure}=="0", GOTO="cpu_online_end" TEST=="online", ATTR{online}=="0", ATTR{online}="1" LABEL="cpu_online_end" # Memory hotadd request SUBSYSTEM!="memory", GOTO="memory_hotplug_end" ACTION!="add", GOTO="memory_hotplug_end" CONST{arch}=="s390*", GOTO="memory_hotplug_end" CONST{arch}=="ppc64*", GOTO="memory_hotplug_end" ENV{.state}="online" CONST{virt}=="none", ENV{.state}="online_movable" ATTR{state}=="offline", ATTR{state}="$env{.state}" LABEL="memory_hotplug_end" # reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge" # load SCSI generic (sg) driver SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg" SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg" # Rule for prandom character device node permissions KERNEL=="prandom", MODE="0644" # Rules for creating the ID_PATH for SCSI devices based on the CCW bus # using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN> # ACTION=="remove", GOTO="zfcp_scsi_device_end" # # Set environment variable "ID_ZFCP_BUS" to "1" if the devices # (both disk and partition) are SCSI devices based on FCP devices # KERNEL=="sd*", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1" # For SCSI disks KERNEL=="sd*[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}" # For partitions on a SCSI disk KERNEL=="sd*[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n" LABEL="zfcp_scsi_device_end" PK �Y�\p�Pc 50-udev-default.rulesnu �[��� # do not edit this file, it will be overwritten on update # run a command on remove events ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}" ACTION=="remove", GOTO="default_end" # The md driver increments diskseq *after* emitting 'change' uevent. # Drop the line below if it is fixed on the kernel side. SUBSYSTEM=="block", KERNEL=="md*", ENV{ID_IGNORE_DISKSEQ}="1" SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}" # select "system RTC" or just use the first one SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc" SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100" SUBSYSTEM=="hidraw", IMPORT{builtin}="hwdb" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}" SUBSYSTEM=="net", IMPORT{builtin}="net_driver" SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK+="ptp_kvm" SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK+="ptp_hyperv" ACTION!="add", GOTO="default_end" SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty" KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout" SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640" SUBSYSTEM=="input", GROUP="input" SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664" SUBSYSTEM=="video4linux", GROUP="video" SUBSYSTEM=="graphics", GROUP="video" SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video" SUBSYSTEM=="dvb", GROUP="video" SUBSYSTEM=="media", GROUP="video" SUBSYSTEM=="cec", GROUP="video" SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0666" SUBSYSTEM=="kfd", GROUP="render", MODE="0666" SUBSYSTEM=="misc", KERNEL=="sgx_enclave", GROUP="sgx", MODE="0660" SUBSYSTEM=="misc", KERNEL=="sgx_vepc", GROUP="sgx", MODE="0660" # When using static_node= with non-default permissions, also update # tmpfiles.d/static-nodes-permissions.conf.in to keep permissions synchronized. SUBSYSTEM=="sound", GROUP="audio", \ OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664" SUBSYSTEM=="firewire", TEST=="units", TEST=="model", \ IMPORT{builtin}="hwdb 'ieee1394:node:ven$attr{vendor}mo$attr{model}units$attr{units}'" SUBSYSTEM=="firewire", TEST=="units", TEST!="model", \ IMPORT{builtin}="hwdb 'ieee1394:node:ven$attr{vendor}units$attr{units}'" SUBSYSTEM=="firewire", TEST=="units", ENV{IEEE1394_UNIT_FUNCTION_MIDI}=="1", GROUP="audio" SUBSYSTEM=="firewire", TEST=="units", ENV{IEEE1394_UNIT_FUNCTION_AUDIO}=="1", GROUP="audio" SUBSYSTEM=="firewire", TEST=="units", ENV{IEEE1394_UNIT_FUNCTION_VIDEO}=="1", GROUP="video" KERNEL=="parport[0-9]*", GROUP="lp" SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp" SUBSYSTEM=="ppdev", GROUP="lp" KERNEL=="lp[0-9]*", GROUP="lp" KERNEL=="irlpt[0-9]*", GROUP="lp" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp" SUBSYSTEM=="block", GROUP="disk" SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom" KERNEL=="sch[0-9]*", GROUP="cdrom" KERNEL=="pktcdvd[0-9]*", GROUP="cdrom" KERNEL=="pktcdvd", GROUP="cdrom" SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk" KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk" KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control" KERNEL=="btrfs-control", GROUP="disk" KERNEL=="rawctl", GROUP="disk" SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk" SUBSYSTEM=="aoe", GROUP="disk", MODE="0220" SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440" KERNEL=="rfkill", MODE="0664" KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun" KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse" # The static_node is required on s390x and ppc (they are using MODULE_ALIAS) KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm" KERNEL=="vfio", MODE="0666", OPTIONS+="static_node=vfio/vfio" KERNEL=="vsock", MODE="0666" KERNEL=="vhost-vsock", GROUP="kvm", MODE="0666", OPTIONS+="static_node=vhost-vsock" KERNEL=="vhost-net", GROUP="kvm", MODE="0666", OPTIONS+="static_node=vhost-net" KERNEL=="udmabuf", GROUP="kvm" SUBSYSTEM!="dmi", GOTO="dmi_end" ENV{ID_SYS_VENDOR_IS_RUBBISH}!="1", ENV{ID_VENDOR}="$attr{sys_vendor}" ENV{ID_SYSFS_ATTRIBUTE_MODEL}=="", ENV{ID_PRODUCT_NAME_IS_RUBBISH}!="1", ENV{ID_MODEL}="$attr{product_name}" ENV{ID_SYSFS_ATTRIBUTE_MODEL}=="product_name", ENV{ID_MODEL}="$attr{product_name}" ENV{ID_SYSFS_ATTRIBUTE_MODEL}=="product_version", ENV{ID_MODEL}="$attr{product_version}" # fallback to board information ENV{ID_VENDOR}=="", ENV{ID_VENDOR}="$attr{board_vendor}" ENV{ID_MODEL}=="", ENV{ID_MODEL}="$attr{board_name}" LABEL="dmi_end" LABEL="default_end" PK �Y�\ĝ��� � 60-autosuspend.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION!="add", GOTO="autosuspend_end" # I2C rules SUBSYSTEM=="i2c", ATTR{name}=="cyapa", \ ATTR{power/control}="on", GOTO="autosuspend_end" # Enable autosuspend if hwdb says so. Here we are relying on # the hwdb import done earlier based on MODALIAS. ENV{ID_AUTOSUSPEND}=="1", TEST=="power/control", \ ATTR{power/control}="auto" # Disable USB persist if hwdb says so. ENV{ID_PERSIST}=="0", TEST=="power/persist", \ ATTR{power/persist}="0" # Set up an autosuspend delay if hwdb say so ENV{ID_AUTOSUSPEND_DELAY_MS}!="", TEST=="power/control", \ ATTR{power/autosuspend_delay_ms}="$env{ID_AUTOSUSPEND_DELAY_MS}" LABEL="autosuspend_end" PK �Y�\��@� � 60-block.rulesnu �[��� # do not edit this file, it will be overwritten on update # enable in-kernel media-presence polling ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", \ ATTR{parameters/events_dfl_poll_msecs}="2000" # forward scsi device event to corresponding block device ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change" # watch metadata changes, caused by tools closing the device node which was opened for writing ACTION!="remove", SUBSYSTEM=="block", \ KERNEL=="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|ubi*|scm*|pmem*|nbd*|zd*", \ OPTIONS+="watch" PK �Y�\��v/ / 60-cdrom_id.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="cdrom_end" SUBSYSTEM!="block", GOTO="cdrom_end" KERNEL!="sr[0-9]*|vdisk*|xvd*", GOTO="cdrom_end" ENV{DEVTYPE}!="disk", GOTO="cdrom_end" # unconditionally tag device as CDROM KERNEL=="sr[0-9]*", ENV{ID_CDROM}="1" # stop automatically any mount units bound to the device if the media eject # button is pressed. ENV{ID_CDROM}=="1", ENV{SYSTEMD_MOUNT_DEVICE_BOUND}="1" # media eject button pressed ENV{DISK_EJECT_REQUEST}=="?*", RUN+="cdrom_id --eject-media $devnode", GOTO="cdrom_end" # import device and media properties and lock tray to # enable the receiving of media eject button events IMPORT{program}="cdrom_id --lock-media $devnode" # ejecting a CD does not remove the device node, so mark the systemd device # unit as inactive while there is no medium; this automatically cleans up of # stale mounts after ejecting ENV{DISK_MEDIA_CHANGE}=="?*", ENV{ID_CDROM_MEDIA}!="?*", ENV{SYSTEMD_READY}="0" KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100" LABEL="cdrom_end" PK �Y�\n&Bm� � 60-drm.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id" # by-path ENV{ID_PATH}=="?*", KERNEL=="card*", SYMLINK+="dri/by-path/$env{ID_PATH}-card" ENV{ID_PATH}=="?*", KERNEL=="controlD*", SYMLINK+="dri/by-path/$env{ID_PATH}-control" ENV{ID_PATH}=="?*", KERNEL=="renderD*", SYMLINK+="dri/by-path/$env{ID_PATH}-render" PK �Y�\zǭt� � 60-evdev.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="evdev_end" KERNEL!="event*", GOTO="evdev_end" # skip later rules when we find something for this input device IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=evdev:", \ IMPORT{builtin}="keyboard", GOTO="evdev_end" # AT keyboard matching by the machine's DMI data DRIVERS=="atkbd", \ IMPORT{builtin}="hwdb 'evdev:atkbd:$attr{[dmi/id]modalias}'", \ IMPORT{builtin}="keyboard", GOTO="evdev_end" # device matching the input device name + properties + the machine's DMI data KERNELS=="input*", \ IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:phys:$attr{phys}:ev:$attr{capabilities/ev}:$attr{[dmi/id]modalias}'", \ IMPORT{builtin}="keyboard", GOTO="evdev_end" # device matching the input device name and the machine's DMI data KERNELS=="input*", \ IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:$attr{[dmi/id]modalias}'", \ IMPORT{builtin}="keyboard", GOTO="evdev_end" LABEL="evdev_end" PK �Y�\g�j � � 60-fido-id.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="fido_id_end" SUBSYSTEM=="hidraw", IMPORT{program}="fido_id" # Tag any form of security token as such ENV{ID_SECURITY_TOKEN}=="1", TAG+="security-device" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0b????:*", ENV{ID_SMARTCARD_READER}="1" # Tag any CCID device (i.e. Smartcard Reader) as security token ENV{ID_SMARTCARD_READER}=="1", TAG+="security-device" LABEL="fido_id_end" PK �Y�\�� 60-input-id.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="id_input_end" SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id" SUBSYSTEM=="input", IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=id-input:modalias:" LABEL="id_input_end" PK �Y�\W�� h h 60-persistent-alsa.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_alsa_end" SUBSYSTEM!="sound", GOTO="persistent_alsa_end" KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end" SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id" ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}" ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}" LABEL="persistent_alsa_end" PK �Y�\���� � 60-persistent-input.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_input_end" SUBSYSTEM!="input", GOTO="persistent_input_end" SUBSYSTEMS=="bluetooth", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end" # Bluetooth devices don't always have the bluetooth subsystem ATTRS{id/bustype}=="0005", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end" SUBSYSTEMS=="rmi4", ENV{ID_BUS}="rmi" SUBSYSTEMS=="serio", ENV{ID_BUS}="i8042" SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id" # determine class name for persistent symlinks ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd" ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick" DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr" ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir" # fill empty serial number ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial" # by-id links KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}" KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}" KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}" KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}" # allow empty class for USB devices, by appending the interface number SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \ SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}" # by-path SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}" ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}" # allow empty class for platform, usb and i2c devices; platform supports only a single interface that way SUBSYSTEMS=="usb|platform|i2c", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \ SYMLINK+="input/by-path/$env{ID_PATH}-event" LABEL="persistent_input_end" PK �Y�\���� � 60-persistent-storage-tape.rulesnu �[��� # do not edit this file, it will be overwritten on update # persistent storage links: /dev/tape/{by-id,by-path} ACTION=="remove", GOTO="persistent_storage_tape_end" ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_tape_end" # type 8 devices are "Medium Changers" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --whitelisted -d $devnode", \ SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL} tape/by-id/scsi-$env{ID_SERIAL}-changer" # iSCSI devices from the same host have all the same ID_SERIAL, # but additionally a property named ID_SCSI_SERIAL. SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", ENV{ID_SCSI_SERIAL}=="?*", \ SYMLINK+="tape/by-id/scsi-$env{ID_SCSI_SERIAL}" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{builtin}="path_id", \ SYMLINK+="tape/by-path/$env{ID_PATH}-changer" SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end" KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id" KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi" KERNEL=="st*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}", OPTIONS+="link_priority=10" KERNEL=="st*[0-9]", ENV{ID_SCSI_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SCSI_SERIAL}" KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst" KERNEL=="nst*[0-9]", ENV{ID_SCSI_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SCSI_SERIAL}-nst" # by-path (parent device path) KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id" KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}" KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst" LABEL="persistent_storage_tape_end" PK �Y�\l���* �* 60-persistent-storage.rulesnu �[��� # do not edit this file, it will be overwritten on update # persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path} # scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de> ACTION=="remove", GOTO="persistent_storage_end" ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_end" SUBSYSTEM!="block|ubi", GOTO="persistent_storage_end" KERNEL!="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|sr*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|ubi*|scm*|pmem*|nbd*|zd*", GOTO="persistent_storage_end" # ignore partitions that span the entire disk TEST=="whole_disk", GOTO="persistent_storage_end" # For partitions import parent disk ID_* information, except ID_FS_*. # # This is particularly important on media where a filesystem superblock and # partition table are found on the same level, e.g. common Linux distro ISO # installation media. # # In the case where a partition device points to the same filesystem that # was detected on the parent disk, the ID_FS_* information is already # present on the partition devices as well as the parent, so no need to # propagate it. In the case where the partition device points to a different # filesystem, merging the parent ID_FS_ properties would lead to # inconsistencies, so we avoid doing so. ENV{DEVTYPE}=="partition", \ IMPORT{parent}="ID_[!F]*", IMPORT{parent}="ID_", \ IMPORT{parent}="ID_F[!S]*", IMPORT{parent}="ID_F", \ IMPORT{parent}="ID_FS[!_]*", IMPORT{parent}="ID_FS" # NVMe KERNEL=="nvme*[0-9]n*[0-9]", ATTR{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?*", ENV{ID_WWN}="$attr{wwid}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{nsid}=="?*", ENV{ID_NSID}="$attr{nsid}" # obsolete symlink with non-escaped characters, kept for backward compatiblity KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ ENV{ID_MODEL}!="*/*", ENV{ID_SERIAL_SHORT}!="*/*", \ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}" # obsolete symlink that might get overridden on adding a new nvme controller, kept for backward compatibility KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ OPTIONS="string_escape=replace", ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", ENV{ID_NSID}=="?*", \ OPTIONS="string_escape=replace", ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}_$env{ID_NSID}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{nsid}=="?*", ENV{ID_NSID}="$attr{nsid}" # obsolete symlink with non-escaped characters, kept for backward compatiblity KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ ENV{ID_MODEL}!="*/*", ENV{ID_SERIAL_SHORT}!="*/*", \ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n" # obsolete symlink that might get overridden on adding a new nvme controller, kept for backward compatibility KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ OPTIONS="string_escape=replace", ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", ENV{ID_NSID}=="?*", \ OPTIONS="string_escape=replace", ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}_$env{ID_NSID}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n" # virtio-blk KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}" KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n" # ATA KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode" # ATAPI devices (SPC-3 or later) KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode" # Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures) KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode" # Also import properties from usb_id for USB devices KERNEL=="sd*[!0-9]|sr*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" # SCSI devices KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi" KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss" KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}" KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n" # Previously, ata_id in the above might not be able to retrieve attributes correctly, # and properties from usb_id were used as a fallback. See issue #24921 and PR #24923. # To keep backward compatibility, still we need to create symlinks based on USB serial. # See issue #25179. KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_USB_SERIAL}=="?*", SYMLINK+="disk/by-id/usb-$env{ID_USB_SERIAL}" KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_USB_SERIAL}=="?*", SYMLINK+="disk/by-id/usb-$env{ID_USB_SERIAL}-part%n" # PMEM devices KERNEL=="pmem*", ENV{DEVTYPE}=="disk", ATTRS{uuid}=="?*", SYMLINK+="disk/by-id/pmem-$attr{uuid}" # FireWire KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" # MMC KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}" KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ENV{ID_NAME}="$attr{name}" KERNEL=="mmcblk[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="mmcblk[0-9]p[0-9]*", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # Memstick KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", \ ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="msblk[0-9]p[0-9]|mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # by-path ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id" ENV{DEVTYPE}=="disk", SUBSYSTEMS=="nvme-subsystem", IMPORT{builtin}="path_id" KERNEL=="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-boot%n" KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}" ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n" # compatible links for ATA devices KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH_ATA_COMPAT}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH_ATA_COMPAT}" ENV{DEVTYPE}=="partition", ENV{ID_PATH_ATA_COMPAT}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH_ATA_COMPAT}-part%n" # legacy virtio-pci by-path links (deprecated) KERNEL=="vd*[!0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}" KERNEL=="vd*[0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n" # allow admin to disable probing the filesystem for slow devices like floppy disk drives ENV{UDEV_DISABLE_PERSISTENT_STORAGE_BLKID_FLAG}=="1", GOTO="persistent_storage_blkid_probe_end" # probe filesystem metadata of optical drives which have a media inserted KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \ IMPORT{builtin}="blkid --hint=session_offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}" # single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \ IMPORT{builtin}="blkid --noraid" # probe filesystem metadata of disks KERNEL!="sr*|mmcblk[0-9]boot[0-9]", IMPORT{builtin}="blkid" LABEL="persistent_storage_blkid_probe_end" # by-label/by-uuid links (filesystem metadata) ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" # by-id (World Wide Name) ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}" ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n" # by-partlabel/by-partuuid links (partition metadata) ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" # by-diskseq link (if an app is told to open a path like this, they may parse # the diskseq number from the path, then issue BLKGETDISKSEQ to verify they really got # the right device, to access specific disks in a race-free fashion) ENV{DISKSEQ}=="?*", ENV{DEVTYPE}!="partition", ENV{DISKSEQ}=="?*", ENV{ID_IGNORE_DISKSEQ}!="1", SYMLINK+="disk/by-diskseq/$env{DISKSEQ}" LABEL="persistent_storage_end" PK �Y�\���� 60-persistent-v4l.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_v4l_end" SUBSYSTEM!="video4linux", GOTO="persistent_v4l_end" ENV{MAJOR}=="", GOTO="persistent_v4l_end" IMPORT{program}="v4l_id $devnode" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" KERNEL=="video*", ENV{ID_SERIAL}=="?*", SYMLINK+="v4l/by-id/$env{ID_BUS}-$env{ID_SERIAL}-video-index$attr{index}" # check for valid "index" number TEST!="index", GOTO="persistent_v4l_end" ATTR{index}!="?*", GOTO="persistent_v4l_end" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", KERNEL=="video*|vbi*", SYMLINK+="v4l/by-path/$env{ID_PATH}-video-index$attr{index}" ENV{ID_PATH}=="?*", KERNEL=="audio*", SYMLINK+="v4l/by-path/$env{ID_PATH}-audio-index$attr{index}" LABEL="persistent_v4l_end" PK �Y�\��e�R R 60-sensor.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="sensor_end" # device matching the sensor's label, name and the machine's DMI data for IIO devices SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="usb|i2c|platform", ATTR{label}!="", \ IMPORT{builtin}="hwdb 'sensor:$attr{label}:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" # Before Linux v6.0, cros-ec-accel used a non-standard 'location' sysfs file SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="platform", \ ATTR{name}=="cros-ec-accel|cros-ec-accel-legacy", ATTR{location}=="base", \ IMPORT{builtin}="hwdb 'sensor:accel-base:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="platform", \ ATTR{name}=="cros-ec-accel|cros-ec-accel-legacy", ATTR{location}=="lid", \ IMPORT{builtin}="hwdb 'sensor:accel-display:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" # device matching the sensor's name and the machine's DMI data for IIO devices SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="usb|i2c|platform", \ IMPORT{builtin}="hwdb 'sensor:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="acpi", \ IMPORT{builtin}="hwdb 'sensor:modalias:acpi:$attr{hid}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="platform", \ IMPORT{builtin}="hwdb 'sensor:modalias:platform:$id:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" LABEL="sensor_end" PK �Y�\��b�p p 60-serial.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="serial_end" SUBSYSTEM!="tty", GOTO="serial_end" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" SUBSYSTEMS=="pci", ENV{ID_BUS}=="", ENV{ID_BUS}="pci", \ ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}", \ IMPORT{builtin}="hwdb --subsystem=pci" # /dev/serial/by-path/, /dev/serial/by-id/ for USB devices KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="serial_end" SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}" ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}" ENV{ID_BUS}=="", GOTO="serial_end" ENV{ID_SERIAL}=="", GOTO="serial_end" ENV{ID_USB_INTERFACE_NUM}=="", GOTO="serial_end" ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}" ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}" LABEL="serial_end" PK �Y�\m`�h h 64-btrfs.rulesnu �[��� # do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="btrfs_end" ACTION=="remove", GOTO="btrfs_end" ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end" ENV{SYSTEMD_READY}=="0", GOTO="btrfs_end" # let the kernel know about this btrfs filesystem, and check if it is complete IMPORT{builtin}="btrfs ready $devnode" # mark the device as not ready to be used by the system ENV{ID_BTRFS_READY}=="0", ENV{SYSTEMD_READY}="0" # reconsider pending devices in case when multidevice volume awaits ENV{ID_BTRFS_READY}=="1", RUN+="/usr/bin/udevadm trigger -s block -p ID_BTRFS_READY=0" LABEL="btrfs_end" PK �Y�\Rm� 70-camera.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="camera_end" SUBSYSTEM=="video4linux", ENV{ID_BUS}="usb" , \ IMPORT{builtin}="hwdb 'camera:usb:v$env{ID_VENDOR_ID}p$env{ID_MODEL_ID}:name:$attr{name}:'", \ GOTO="camera_end" LABEL="camera_end" PK �Y�\ �,� � 70-joystick.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="joystick_end" ENV{ID_INPUT_JOYSTICK}=="", GOTO="joystick_end" KERNEL!="event*", GOTO="joystick_end" # joystick:<bustype>:v<vid>p<pid>:name:<name>:* KERNELS=="input*", ENV{ID_BUS}!="", \ IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="joystick_end" LABEL="joystick_end" PK �Y�\���y� � 70-memory.rulesnu �[��� # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="memory_end" SUBSYSTEM!="dmi", GOTO="memory_end" IMPORT{program}="dmi_memory_id" LABEL="memory_end" PK �Y�\ ��y� � 85-nm-unmanaged.rulesnu �[��� # Do not modify this file, it will get overwritten on updates. # To override or extend the rules place a file in /etc/udev/rules.d SUBSYSTEM!="net", GOTO="nm_unmanaged_end" ACTION!="add|change|move", GOTO="nm_unmanaged_end" # VirtualBox host networking. Out-of-tree driver that looks like an ordinary # Ethernet. No parent device (lives in /virtual/), no support for ethtool # to identify the driver, MAC address defaults to 08:00:27:, but can be # changed. Interface name will have to do, it's always vboxnet*. ENV{INTERFACE}=="vboxnet[0-9]*", ENV{NM_UNMANAGED}="1" # VMWare host networking. Out-of-tree driver that looks like an ordinary # Ethernet. No parent device (lives in /virtual/), no support for # ethtool to identify the driver. They have their own MAC prefix that # can not be changed. ATTR{address}=="00:50:56:*", ENV{INTERFACE}=="vmnet[0-9]*", ENV{NM_UNMANAGED}="1" # Parallels Workstation host networking. Out-of-tree driver that looks like # an ordinary Ethernet. No parent device (lives in /virtual/), no support for # ethtool to identify the driver and the interface name is too generic. # However, they have their own MAC prefix that can not be changed. ATTR{address}=="00:1c:42:*", ENV{INTERFACE}=="vnic[0-9]*", ENV{NM_UNMANAGED}="1" # Virtual Ethernet device pair. Often used to communicate with a peer interface # in another net namespace and managed by libvirt, Docker or the like. # Generally we don't want to mess with those. One exception would be the # full system containers, like LXC or LXD. LXC containers run via libvirt # don't use udev, so this doesn't apply. LXD does, though. To deal with the # LXD situation, let's treat the devices called eth* as regular ethernet. ENV{ID_NET_DRIVER}=="veth", ENV{INTERFACE}!="eth[0-9]*", ENV{NM_UNMANAGED}="1" # USB gadget device. Unmanage by default, since whatever created it # might want to set it up itself (e.g. activate an ipv4.method=shared # connection). ENV{DEVTYPE}=="gadget", ENV{NM_UNMANAGED}="1" LABEL="nm_unmanaged_end" PK �Y�\wr�b b 95-upower-wup.rulesnu �[��� ############################################################################################################## # Watts Up? Pro Devices # SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="A80?????", ENV{UPOWER_VENDOR}="Watts Up, Inc.", ENV{UPOWER_PRODUCT}="Watts Up? Pro", ENV{UP_MONITOR_TYPE}="wup" PK �Y�\�np p 63-fc-wwpn-id.rulesnu �[��� # # FC WWPN-based by-path links # ACTION!="add|change", GOTO="fc_wwpn_end" KERNEL!="sd*", GOTO="fc_wwpn_end" ENV{DEVTYPE}=="disk", IMPORT{program}="fc_wwpn_id %p" ENV{DEVTYPE}=="partition", IMPORT{parent}="FC_*" ENV{FC_TARGET_WWPN}!="?*", GOTO="fc_wwpn_end" ENV{FC_INITIATOR_WWPN}!="?*", GOTO="fc_wwpn_end" ENV{FC_TARGET_LUN}!="?*", GOTO="fc_wwpn_end" ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}" ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}-part%n" LABEL="fc_wwpn_end" PK �Y�\�C�d� � 65-scsi-cciss_id.rulesnu �[��� # cciss compat rules ACTION!="add|change", GOTO="cciss_compat_end" KERNEL!="sd*", GOTO="cciss_compat_end" ENV{ID_VENDOR}!="HP", ENV{ID_VENDOR}!="COMPAQ", GOTO="cciss_compat_end" ENV{ID_MODEL}!="LOGICAL_VOLUME", GOTO="cciss_compat_end" ENV{DEVTYPE}=="disk", DRIVERS=="hpsa", IMPORT{program}="cciss_id %p" ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*" ENV{ID_CCISS}!="?*", GOTO="cciss_compat_end" ENV{DEVTYPE}=="disk", SYMLINK+="cciss/$env{ID_CCISS}" ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/cciss-$env{ID_SERIAL}" ENV{DEVTYPE}=="partition", SYMLINK+="cciss/$env{ID_CCISS}p%n" ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/cciss-$env{ID_SERIAL}-part%n" LABEL="cciss_compat_end" PK �Y�\] Aȁ � 60-net.rulesnu �[��� ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="1", PROGRAM="/lib/udev/rename_device", RESULT=="?*", NAME="$result" PK �Y�\��m� � 95-upower-hid.rulesnu �[��� ############################################################################################################## # Uninterruptible Power Supplies with USB HID interfaces # # This file was automatically generated by NUT: # https://github.com/networkupstools/nut/ # # To keep up to date, monitor upstream NUT # https://github.com/networkupstools/nut/commits/master/scripts/upower/95-upower-hid.rules # or checkout the NUT repository and call 'tools/nut-usbinfo.pl' # newer hiddev are part of the usbmisc class SUBSYSTEM=="usbmisc", GOTO="up_hid_chkdev" # only support USB, else ignore SUBSYSTEM!="usb", GOTO="up_hid_end" # if usbraw device, ignore LABEL="up_hid_chkdev" KERNEL!="hiddev*", GOTO="up_hid_end" # if an interface, ignore ENV{DEVTYPE}=="usb_interface", GOTO="up_hid_end" ATTRS{idVendor}=="03f0", ENV{UPOWER_VENDOR}="Hewlett Packard" ATTRS{idVendor}=="0463", ENV{UPOWER_VENDOR}="Eaton" ATTRS{idVendor}=="047c", ENV{UPOWER_VENDOR}="Dell" ATTRS{idVendor}=="04d8", ENV{UPOWER_VENDOR}="Minibox" ATTRS{idVendor}=="050d", ENV{UPOWER_VENDOR}="Belkin" ATTRS{idVendor}=="051d", ENV{UPOWER_VENDOR}="APC" ATTRS{idVendor}=="0592", ENV{UPOWER_VENDOR}="Powerware" ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Phoenixtec Power Co., Ltd" ATTRS{idVendor}=="075d", ENV{UPOWER_VENDOR}="iDowell" ATTRS{idVendor}=="0764", ENV{UPOWER_VENDOR}="Cyber Power Systems" ATTRS{idVendor}=="09ae", ENV{UPOWER_VENDOR}="TrippLite" ATTRS{idVendor}=="0d9f", ENV{UPOWER_VENDOR}="PowerCOM" ATTRS{idVendor}=="10af", ENV{UPOWER_VENDOR}="Liebert" # Hewlett Packard ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="0001", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f06", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f08", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f09", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f0a", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe0", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe1", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe2", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe3", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe5", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe6", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe7", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1fe8", ENV{UPOWER_BATTERY_TYPE}="ups" # Eaton ATTRS{idVendor}=="0463", ATTRS{idProduct}=="0001", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0463", ATTRS{idProduct}=="ffff", ENV{UPOWER_BATTERY_TYPE}="ups" # Dell ATTRS{idVendor}=="047c", ATTRS{idProduct}=="ffff", ENV{UPOWER_BATTERY_TYPE}="ups" # Minibox ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="d004", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="d005", ENV{UPOWER_BATTERY_TYPE}="ups" # Belkin ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0375", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0551", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0750", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0751", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0900", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0910", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0912", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0980", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0f51", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="050d", ATTRS{idProduct}=="1100", ENV{UPOWER_BATTERY_TYPE}="ups" # APC ATTRS{idVendor}=="051d", ATTRS{idProduct}=="0000", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="051d", ATTRS{idProduct}=="0002", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="051d", ATTRS{idProduct}=="0003", ENV{UPOWER_BATTERY_TYPE}="ups" # Powerware ATTRS{idVendor}=="0592", ATTRS{idProduct}=="0004", ENV{UPOWER_BATTERY_TYPE}="ups" # Phoenixtec Power Co., Ltd ATTRS{idVendor}=="06da", ATTRS{idProduct}=="ffff", ENV{UPOWER_BATTERY_TYPE}="ups" # iDowell ATTRS{idVendor}=="075d", ATTRS{idProduct}=="0300", ENV{UPOWER_BATTERY_TYPE}="ups" # Cyber Power Systems ATTRS{idVendor}=="0764", ATTRS{idProduct}=="0005", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0764", ATTRS{idProduct}=="0501", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0764", ATTRS{idProduct}=="0601", ENV{UPOWER_BATTERY_TYPE}="ups" # TrippLite ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="1003", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="1007", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="1008", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="1009", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="1010", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2005", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2007", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2008", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2009", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2010", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2011", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2012", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2013", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="2014", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3008", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3009", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3010", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3011", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3012", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3013", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3014", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3015", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="3016", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4001", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4002", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4003", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4004", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4005", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4006", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4007", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="09ae", ATTRS{idProduct}=="4008", ENV{UPOWER_BATTERY_TYPE}="ups" # PowerCOM ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="0001", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="0004", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="00a2", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="00a3", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="00a4", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="00a5", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="0d9f", ATTRS{idProduct}=="00a6", ENV{UPOWER_BATTERY_TYPE}="ups" # Liebert ATTRS{idVendor}=="10af", ATTRS{idProduct}=="0001", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="10af", ATTRS{idProduct}=="0004", ENV{UPOWER_BATTERY_TYPE}="ups" ATTRS{idVendor}=="10af", ATTRS{idProduct}=="0008", ENV{UPOWER_BATTERY_TYPE}="ups" LABEL="up_hid_end" PK �Y�\fv�F F 64-md-raid-assembly.rulesnu �[��� # do not edit this file, it will be overwritten on update # Don't process any events if anaconda is running as anaconda brings up # raid devices manually ENV{ANACONDA}=="?*", GOTO="md_inc_end" # assemble md arrays # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_inc_end" SUBSYSTEM!="block", GOTO="md_inc_end" # skip non-initialized devices ENV{SYSTEMD_READY}=="0", GOTO="md_inc_end" # handle potential components of arrays (the ones supported by md) # For member devices which are md/dm devices, we don't need to # handle add event. Because md/dm devices need to do some init jobs. # Then the change event happens. # When adding md/dm devices, ID_FS_TYPE can only be linux_raid_member # after change event happens. ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="md_inc" # "noiswmd" on kernel command line stops mdadm from handling # "isw" (aka IMSM - Intel RAID). # "nodmraid" on kernel command line stops mdadm from handling # "isw" or "ddf". IMPORT{cmdline}="noiswmd" IMPORT{cmdline}="nodmraid" ENV{nodmraid}=="?*", GOTO="md_inc_end" ENV{ID_FS_TYPE}=="ddf_raid_member", GOTO="md_inc" ENV{noiswmd}=="?*", GOTO="md_inc_end" ENV{ID_FS_TYPE}=="isw_raid_member", ACTION!="change", GOTO="md_inc" GOTO="md_inc_end" LABEL="md_inc" # Make sure we don't handle dm devices when some limits are set. # And linux_raid_member only be set when change/remove event happen. # So we don't need to consider add event here. KERNEL=="dm-*", ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="md_inc_end" KERNEL=="dm-*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="md_inc_end" KERNEL=="dm-*", ENV{DM_SUSPENDED}=="1", GOTO="md_inc_end" # Bare disks are ready when add event happens, the raid can be assembled. ACTION=="change", KERNEL!="dm-*|md*", GOTO="md_inc_end" # remember you can limit what gets auto/incrementally assembled by # mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY' ACTION!="remove", IMPORT{program}="/usr/sbin/mdadm --incremental --export $devnode --offroot $env{DEVLINKS}" ACTION!="remove", ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer" ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/usr/sbin/mdadm -If $devnode --path $env{ID_PATH}" ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/usr/sbin/mdadm -If $devnode" LABEL="md_inc_end" PK �Y�\�(�Z Z $ 69-md-clustered-confirm-device.rulesnu �[��� # do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="clustermd_end" # handle md arrays KERNEL!="md*", GOTO="clustermd_end" ENV{DEVTYPE}!="disk", GOTO="clustermd_end" ACTION!="change", GOTO="clustermd_end" ENV{EVENT}!="ADD_DEVICE", GOTO="clustermd_end" ENV{DEVICE_UUID}!="?*", GOTO="clustermd_end" ENV{RAID_DISK}!="?*", GOTO="clustermd_end" # Based on the received UUID, node confirms the device if # it is found by blkid, otherwise the node reports it is # missing. PROGRAM="/usr/sbin/blkid -o device -t UUID_SUB=$env{DEVICE_UUID}", ENV{.md.newdevice} = "$result" ENV{.md.newdevice}!="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:$env{.md.newdevice}" ENV{.md.newdevice}=="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:missing" LABEL="clustermd_end" PK �Y�\�>�� � 71-prefixdevname.rulesnu �[��� # Do not edit this file, it will be overwritten on updates SUBSYSTEM!="net", GOTO="net_ifnames_prefix_end" ACTION!="add", GOTO="net_ifnames_prefix_end" ATTR{type}!="1", GOTO="net_ifnames_prefix_end" IMPORT{cmdline}="net.ifnames.prefix" ENV{net.ifnames.prefix}!="?*", GOTO="net_ifnames_prefix_end" PROGRAM="/usr/lib/udev/prefixdevname", RESULT=="?*", NAME="$result" LABEL="net_ifnames_prefix_end" PK �Y�\��Tv v 71-nvmf-hpe.rulesnu �[��� PK �Y�\�$�DD D � 10-dm.rulesnu ��6�$ PK �Y�\"��4 6 13-dm-disk.rulesnu ��6�$ PK �Y�\�I� � x( 95-dm-notify.rulesnu ��6�$ PK �Y�\�=[H8 8 �* 91-drm-modeset.rulesnu �[��� PK �Y�\�9��� � + 11-dm-parts.rulesnu �[��� PK �Y�\?�p p �0 66-kpartx.rulesnu �[��� PK �Y�\6�F�v v �6 68-del-part-nodes.rulesnu �[��� PK �Y�\P��� � h; 60-tpm-udev.rulesnu �[��� PK �Y�\��~� � �< 70-mouse.rulesnu �[��� PK �Y�\�@ @ �? 70-power-switch.rulesnu �[��� PK �Y�\���� � =B 70-touchpad.rulesnu �[��� PK �Y�\ �7Ϩ � WD 70-uaccess.rulesnu �[��� PK �Y�\�ۍX� � ?S 71-seat.rulesnu �[��� PK �Y�\l `� � fb 73-seat-late.rulesnu �[��� PK �Y�\�\I> +e 75-net-description.rulesnu �[��� PK �Y�\G�� � sg 75-probe_mtd.rulesnu �[��� PK �Y�\2>��� � ch 78-sound-card.rulesnu �[��� PK �Y�\�XE�X X v{ 80-drivers.rulesnu �[��� PK �Y�\&��' ' ~ 80-net-setup-link.rulesnu �[��� PK �Y�\\\�� | 81-net-dhcp.rulesnu �[��� PK �Y�\�g�� � ́ 90-vconsole.rulesnu �[��� PK �Y�\�/�:� � �� 99-systemd.rulesnu �[��� PK �Y�\e���� � � READMEnu �[��� PK �Y�\�� ϙ 70-nvmf-keys.rulesnu �[��� PK �Y�\��u5 u5 � 90-pipewire-alsa.rulesnu �[��� PK �Y�\� � �� 84-nm-drivers.rulesnu �[��� PK �Y�\ ���L L /� 90-nm-thunderbolt.rulesnu �[��� PK �Y�\�qE� � �� 98-kexec.rulesnu �[��� PK �Y�\�� � � �� 40-usb-blacklist.rulesnu �[��� PK �Y�\wf �� � �� 61-scsi-sg3_id.rulesnu �[��� PK �Y�\I�� � �� 63-scsi-sg3_symlink.rulesnu �[��� PK �Y�\l �� � � 70-nvmf-autoconnect.rulesnu �[��� PK �Y�\�1bw_ _ � 99-nfs.rulesnu �[��� PK �Y�\���A A z 01-md-raid-creating.rulesnu �[��� PK �Y�\Y8�-& & 63-md-raid-arrays.rulesnu �[��� PK �Y�\�" q 66-md-auto-readd.rulesnu �[��� PK �Y�\LJv v 6 65-persistent-net-nbft.rulesnu �[��� PK �Y�\�o�n � 71-nvmf-netapp.rulesnu �[��� PK �Y�\��P P L 71-nvmf-vastdata.rulesnu �[��� PK �Y�\g-}�� � � 40-elevator.rulesnu �[��� PK �Y�\�_�&� � � 40-redhat.rulesnu �[��� PK �Y�\p�Pc ) 50-udev-default.rulesnu �[��� PK �Y�\ĝ��� � x> 60-autosuspend.rulesnu �[��� PK �Y�\��@� � |A 60-block.rulesnu �[��� PK �Y�\��v/ / yD 60-cdrom_id.rulesnu �[��� PK �Y�\n&Bm� � �H 60-drm.rulesnu �[��� PK �Y�\zǭt� � �J 60-evdev.rulesnu �[��� PK �Y�\g�j � � �N 60-fido-id.rulesnu �[��� PK �Y�\�� Q 60-input-id.rulesnu �[��� PK �Y�\W�� h h dR 60-persistent-alsa.rulesnu �[��� PK �Y�\���� � U 60-persistent-input.rulesnu �[��� PK �Y�\���� � �_ 60-persistent-storage-tape.rulesnu �[��� PK �Y�\l���* �* �h 60-persistent-storage.rulesnu �[��� PK �Y�\���� ȓ 60-persistent-v4l.rulesnu �[��� PK �Y�\��e�R R � 60-sensor.rulesnu �[��� PK �Y�\��b�p p �� 60-serial.rulesnu �[��� PK �Y�\m`�h h P� 64-btrfs.rulesnu �[��� PK �Y�\Rm� �� 70-camera.rulesnu �[��� PK �Y�\ �,� � N� 70-joystick.rulesnu �[��� PK �Y�\���y� � ?� 70-memory.rulesnu �[��� PK �Y�\ ��y� � 6� 85-nm-unmanaged.rulesnu �[��� PK �Y�\wr�b b X� 95-upower-wup.rulesnu �[��� PK �Y�\�np p �� 63-fc-wwpn-id.rulesnu �[��� PK �Y�\�C�d� � �� 65-scsi-cciss_id.rulesnu �[��� PK �Y�\] Aȁ � Ҹ 60-net.rulesnu �[��� PK �Y�\��m� � �� 95-upower-hid.rulesnu �[��� PK �Y�\fv�F F � 64-md-raid-assembly.rulesnu �[��� PK �Y�\�(�Z Z $ � 69-md-clustered-confirm-device.rulesnu �[��� PK �Y�\�>�� � �� 71-prefixdevname.rulesnu �[��� PK F F � ��
| ver. 1.4 |
Github
|
.
| PHP 8.1.34 | Generation time: 0 |
proxy
|
phpinfo
|
Settings